FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I check if the reverse lights are not functioning in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What should I check if the reverse lights are not functioning in a 2019 Toyota Camry?

What should I check if the reverse lights are not functioning in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
637 words

Problem Statement

Learn how to diagnose and fix reverse light issues in your 2019 Toyota Camry with this comprehensive guide.

Affected Component
reverse lights
Estimated Time
2-3 hours

Symptoms

  • •Reverse lights do not illuminate when the vehicle is shifted into reverse.
  • •No corresponding warning lights on the dashboard.
  • •Other lights (e.g., brake lights, tail lights) function normally.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or pliers
  • •Screwdriver set
  • •Replacement bulbs
  • •Replacement reverse light switch
  • •Wire connectors and electrical tape

Additional Information

Affected Component
reverse lights
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Certainly! If the reverse lights are not functioning in a 2019 Toyota Camry, it can be due to a few potential issues. Below is a detailed guide on the symptoms, diagnostic steps, tools required, and repair instructions.

Step 1: Visual Inspection

  1. Check the Bulbs:
    • Inspect the reverse light bulbs for any signs of failure (burnt filaments, etc.).

Step 2: Verify the Gear Selector

  1. Gear Selector Position:
    • Ensure the gear shift is fully engaged in the "Reverse" position.

Step 3: Inspect Fuses

  1. Fuse Check:
    • Locate the fuse box, typically found under the dashboard or in the engine compartment.
    • Refer to the owner’s manual for the specific fuse related to the reverse lights (often labeled as "Back Up" or "Reverse").
    • Remove the fuse and inspect it for continuity using a multimeter. Replace if blown.

Step 4: Check the Reverse Light Switch

  1. Reverse Light Switch:
    • The reverse light switch is usually mounted on the transmission. Check the following:
      • Unplug the connector and inspect for corrosion or damage.
      • Use a multimeter to test the switch:
        • In "Reverse," the switch should show continuity (close to 0 ohms).
        • In other positions, it should show no continuity (infinite resistance).
    • If the switch is faulty, it will need replacement.

Step 5: Wiring Inspection

  1. Wiring Inspection:
    • Follow the wiring harness from the reverse light switch to the bulbs.
    • Inspect for any signs of damage, such as frays, breaks, or corrosion.
    • Use a multimeter to check for voltage at the connector when the vehicle is in reverse.
Tools Required
  • Multimeter
  • Fuse puller or pliers
  • Screwdriver set (for accessing the bulbs and wiring)
  • Replacement bulbs (if needed)
  • Replacement reverse light switch (if faulty)
  • Wire connectors and electrical tape (if there’s wiring damage)
Repair Instructions

Step 1: Replace Bulbs (if necessary)

  1. Access Reverse Light Bulbs:
    • Open the trunk and remove the tail light assembly by unscrewing the retaining screws.
    • Gently pull the assembly out and locate the reverse light bulb.
  2. Replace the Bulb:
    • Twist the bulb socket counterclockwise to remove it.
    • Pull out the old bulb and insert the new bulb.
    • Reassemble the tail light assembly.

Step 2: Replace the Fuse (if necessary)

  1. Fuse Replacement:
    • If the fuse is blown, replace it with a new one of the same amperage rating.
    • Reassemble the fuse box cover.

Step 3: Replace the Reverse Light Switch (if necessary)

  1. Access the Switch:
    • Raise the vehicle and secure it with jack stands.
    • Locate the reverse light switch on the transmission.
  2. Remove the Old Switch:
    • Disconnect the electrical connector and unscrew the switch using the appropriate socket or wrench.
  3. Install the New Switch:
    • Apply a small amount of thread sealant to the new switch’s threads.
    • Screw in the new switch and reconnect the electrical connector.
  4. Lower the Vehicle:
    • Remove the jack stands and lower the vehicle to the ground.

Step 4: Test the System

  1. Final Test:
    • Start the vehicle and shift into reverse.
    • Check if the reverse lights illuminate properly.
    • If the lights still do not work, revisit the wiring and ensure all connections are secure and correct.

Following this guide should help diagnose and resolve the issue with the reverse lights not functioning in a 2019 Toyota Camry. If problems persist, further diagnostics may be required, potentially involving the vehicle's body control module (BCM) or other electronic systems.