FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I check if my 2022 Toyota Camry has a rough ride? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What should I check if my 2022 Toyota Camry has a rough ride?

What should I check if my 2022 Toyota Camry has a rough ride?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
596 words

Problem Statement

Learn how to diagnose and repair a rough ride in your 2022 Toyota Camry with our step-by-step guide, including symptoms, diagnostic steps, and necessary tools.

Affected Component
suspension
Estimated Time
2-4 hours

Symptoms

  • •Excessive vibrations felt through the steering wheel and seats.
  • •Bouncing or jarring sensations over bumps.
  • •Noise from the suspension or tires.
  • •Uneven tire wear.
  • •Difficulty maintaining control or stability.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Tire pressure gauge
  • •Jack and jack stands
  • •Tire balancing machine
  • •Alignment machine
  • •Wrench set
  • •Torque wrench
  • •Pry bar
  • •Basic hand tools (sockets, wrenches)

Additional Information

Affected Component
suspension
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

If your 2022 Toyota Camry is experiencing a rough ride, there are several potential causes that you can investigate. Below, I've outlined a detailed step-by-step diagnostic and repair guide to help you identify and resolve the issue.

Step 1: Visual Inspection

Tools Required:

  • Flashlight
  • Tire pressure gauge
  • Jack and jack stands

  1. Check Tire Condition:

    • Inspect all tires for signs of uneven wear, bulges, or damage.
    • Use a tire pressure gauge to check that all tires are inflated to the manufacturer’s recommended PSI (found on the driver’s side door jamb).

  2. Inspect Suspension Components:

    • With the vehicle safely raised on jack stands, visually inspect the suspension components (shocks/struts, control arms, bushings) for any signs of wear or damage.
    • Look for leaking fluid around the shocks or struts, which could indicate failure.

Step 2: Tire Balance and Alignment

Tools Required:

  • Tire balancing machine (usually found at tire shops)
  • Alignment machine (usually found at alignment shops)

  1. Check Tire Balance:

    • If you suspect that the tires are unbalanced, visit a tire shop to have them balanced. Unbalanced tires can cause vibrations and a rough ride.

  2. Check Wheel Alignment:

    • Misalignment can lead to uneven tire wear and a rough ride. A professional alignment service can check and correct this.

Step 3: Test Drive

  1. Conduct a Test Drive:
    • Drive the vehicle over various road conditions (smooth, bumpy, and uneven surfaces).
    • Pay attention to any specific areas where the rough ride is more pronounced; this can help isolate the issue.
Further Diagnostics

Step 4: Check for Suspension Problems

Tools Required:

  • Wrench set
  • Torque wrench
  • Pry bar

  1. Inspect Shock Absorbers/Struts:

    • Push down on each corner of the vehicle. The car should only bounce once and settle. If it continues to bounce, the shocks/struts may be worn out and need replacement.
    • Use a pry bar to check for excessive play in suspension components.

  2. Check Bushings and Mounts:

    • Inspect all rubber bushings for cracks or degradation. Replace any that are damaged.
    • Ensure that strut mounts are secure and not worn out.
Repair Instructions

Step 5: Replace Worn Components

Tools Required:

  • Appropriate replacement parts (shocks, struts, bushings as needed)
  • Basic hand tools (sockets, wrenches)
  • Torque wrench

  1. Replacing Shocks/Struts:

    • Lift the vehicle and remove the wheels.
    • Disconnect the shock/strut assembly from the vehicle (remove bolts at the top and bottom).
    • Install the new shock/strut assembly, ensuring that all bolts are torqued to manufacturer specifications.

  2. Replacing Bushings:

    • Remove suspension components as necessary to access bushings.
    • Use a press or appropriate tools to remove and install new bushings.
Final Check

Step 6: Recheck Alignment and Balance

  1. Re-balance Tires:

    • After any repairs, have the tires balanced again to ensure they are functioning correctly.

  2. Perform Wheel Alignment:

    • Ensure that the alignment is set to manufacturer specifications to prevent future tire wear and maintain a smooth ride.
Summary

By following these steps methodically, you can diagnose and potentially resolve the rough ride issue with your 2022 Toyota Camry. If the problem persists after performing these checks and repairs, it may be advisable to consult a professional technician for further diagnostics.