What should I check if my 2020 Toyota Camry has a rough transmission shift?

Toyota Camry Eighth Generation (2018-present)

Error Codes

medium

Difficulty

medium

Severity

4 min read

721 words

Problem Statement

Diagnose and repair rough transmission shifts in your 2020 Toyota Camry with systematic steps including checking DTCs, inspecting fluid, and testing mounts.

Affected Component

transmission

Symptoms

•Harsh or rough shifting during acceleration or deceleration.
•Delay in gear engagement (slipping).
•Unusual noises during shifting (clunking or grinding).
•Warning lights on the dashboard (check engine light may be illuminated).

Diagnostic Steps

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid dipstick
•clean rag
•funnel
•new transmission fluid
•jack
•jack stands
•pry bar
•multimeter
•wiring diagram
•socket set
•wrench set

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Rough Transmission Shift Diagnosis for 2020 Toyota Camry (XV70)

When experiencing rough transmission shifts in your 2020 Toyota Camry, it’s important to systematically diagnose the issue to determine the root cause. Below are the symptoms, diagnostic steps, tools required, and repair instructions.

Repair Instructions

Replace Transmission Fluid and Filter
- Tools Required: Transmission fluid, new filter (if applicable), socket set, wrench set.
- Instructions:
  - Drain the old transmission fluid from the transmission pan.
  - Remove the transmission pan and replace the filter (if applicable).
  - Clean the pan and re-install it with a new gasket.
  - Refill the transmission with the appropriate type and amount of fluid as specified in the owner's manual.
Replace Damaged Transmission Mounts
- Instructions:
  - Remove any components obstructing access to the mounts.
  - Support the transmission with a jack.
  - Remove the bolts securing the damaged mounts and replace them with new ones.
  - Reassemble any components removed during the process.
Repair or Replace Faulty Sensors
- Instructions:
  - If tests indicated a faulty speed sensor, remove it by unscrewing it from the transmission.
  - Install the new sensor and reconnect the wiring harness.
  - Clear any DTCs using the OBD-II scanner and test drive the vehicle to ensure the issue is resolved.
Update Transmission Control Module (TCM) Software
- If the vehicle has any software updates available, consider checking with your Toyota dealer to ensure the TCM is running the latest software version.

Conclusion

After performing the above diagnostic steps and repairs, retest the vehicle to confirm that the rough transmission shifting issue has been resolved. If problems persist, further diagnosis may be required, including examining the transmission internals or consulting with a professional technician.