What does the maintenance required light mean on my 2018 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

1-2 hours

Time

medium

Difficulty

low

Severity

3 min read

579 words

Problem Statement

Learn what the maintenance required light means on your 2018 Toyota Camry and how to address it with scheduled maintenance.

Affected Component

Maintenance System

Estimated Time

1-2 hours

Symptoms

•Maintenance Required Light Illuminated
•No Performance Issues

Diagnostic Steps

1
Check Odometer Reading
2
Review Maintenance Schedule
3
Inspect Maintenance History

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II Scanner (optional)
•Owner’s Manual
•Basic Hand Tools
•Oil Filter Wrench
•Oil Catch Pan
•New Oil and Oil Filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Maintenance Required Light on 2018 Toyota Camry

The "Maintenance Required" light on your 2018 Toyota Camry is an indicator that your vehicle is due for scheduled maintenance. This light is part of the vehicle's onboard diagnostics system and is intended to remind you of routine service needs, which typically include oil changes and other periodic inspections.

Tools Required

OBD-II Scanner (optional): To read any additional trouble codes if the light is related to other issues.
Owner’s Manual: For specific maintenance schedules and procedures.
Basic Hand Tools: Wrenches, sockets, screwdrivers (if you are performing maintenance yourself).
Oil Filter Wrench: If changing oil.
Oil Catch Pan: To collect old oil.
New Oil and Oil Filter: As per manufacturer specifications.

Repair Instructions

Step 1: Perform Required Maintenance

Change Engine Oil and Filter:
- Locate the Oil Drain Plug: Underneath the vehicle, find the oil drain plug and place your oil catch pan underneath it.
- Remove Drain Plug: Use a socket wrench to loosen and remove the drain plug. Allow the oil to drain completely.
- Replace Oil Filter: Use an oil filter wrench to remove the old oil filter. Install a new filter, lubricating the rubber gasket with a small amount of new oil before tightening it by hand.
- Reinstall Drain Plug: Once oil has drained, reinstall the drain plug and tighten it securely.
- Add New Oil: Refer to the owner’s manual for the correct oil type and quantity. Use a funnel to pour new oil into the engine.
Inspect Other Fluids:
- Check the levels of brake fluid, transmission fluid, coolant, and power steering fluid. Top off any that are low.
Tire Rotation and Inspection:
- Rotate the tires if needed and check for tire pressure and tread wear.
Brake Inspection:
- Inspect brake pads and rotors for wear.

Step 2: Reset the Maintenance Light

Turn the Ignition On: Without starting the engine, turn the key to the "On" position or press the start button twice (without pressing the brake).
Navigate to the Settings Menu:
- Using the steering wheel controls, navigate to "Settings" on the dashboard display.
Select Maintenance:
- Find the "Maintenance" option in the settings.
Reset the Light:
- Select the "Reset" option for the maintenance required light and confirm the reset.
Confirm Reset: Turn the ignition off and then back on to ensure the light has been reset.

Conclusion

The "Maintenance Required" light on your 2018 Toyota Camry is a reminder for routine maintenance. By performing the necessary service and resetting the light, you can keep your vehicle running smoothly. If the light remains illuminated after performing the maintenance or if you encounter additional symptoms, consider consulting a professional technician for further diagnostics.