What does it mean if the tire pressure warning light stays on in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

576 words

Problem Statement

Learn about the causes of the tire pressure warning light staying on in a 2019 Toyota Camry and how to diagnose and fix the issue.

Affected Component

Tire Pressure Monitoring System (TPMS)

Estimated Time

1-2 hours

Symptoms

•Warning Light: The tire pressure warning light remains illuminated on the dashboard.
•Potential Performance Issues: You may notice changes in handling or ride comfort.
•TPMS Message: The vehicle's display may show a message indicating low tire pressure.

Diagnostic Steps

1
Visual Inspection: Inspect each tire for visible damage, such as cuts, punctures, or bulges.
2
Check Tire Pressure: Remove the valve stem cap from each tire and use a tire pressure gauge to check the pressure.
3
Check for Leaks: Spray soapy water on the valve stem and around the tire sidewalls to look for bubbles indicating a leak.
4
Reset TPMS: Attempt to reset the TPMS if tire pressures are correct.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor (if needed)
•Spray bottle with soapy water

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Visual Inspection: Inspect each tire for visible damage, such as cuts, punctures, or bulges.
2
Check Tire Pressure: Remove the valve stem cap from each tire and use a tire pressure gauge to check the pressure.
3
Check for Leaks: Spray soapy water on the valve stem and around the tire sidewalls to look for bubbles indicating a leak.
4
Reset TPMS: Attempt to reset the TPMS if tire pressures are correct.

Solution

Understanding the Tire Pressure Warning Light in a 2019 Toyota Camry

Possible Causes:

Low Tire Pressure: One or more tires may be under-inflated.
Faulty Tire Pressure Monitoring System (TPMS): The TPMS sensor may be malfunctioning.
Temperature Changes: Significant temperature drops can cause tire pressure to decrease.
Tire Leak: There may be a puncture or other leak in one or more tires.
Sensor Issues: A damaged or dead battery in the TPMS sensor can cause the warning light to stay on.

Step 1: Visual Inspection

Tools Required: None
Procedure:
- Inspect each tire for visible damage, such as cuts, punctures, or bulges.
- Check for any signs of a flat tire or abnormal wear patterns.

Step 2: Check Tire Pressure

Tools Required: Tire pressure gauge, air compressor (if needed)
Procedure:
- Remove the valve stem cap from each tire.
- Press the tire pressure gauge onto the valve stem and read the pressure.
- Compare the readings to the recommended tire pressure (usually found on the driver's side door jamb).
- Inflate any tires that are below the recommended pressure.

Step 3: Check for Leaks

Tools Required: Spray bottle with soapy water
Procedure:
- Spray soapy water on the valve stem and around the tire sidewalls.
- Look for bubbles forming, which would indicate a leak.

Step 4: Reset TPMS

Tools Required: None (though a TPMS scan tool may be helpful)
Procedure:
- If tire pressures are correct, attempt to reset the TPMS:
  1. Turn the ignition to the “ON” position (do not start the engine).
  2. Press the TPMS reset button (located under the steering wheel or in the glove box).
  3. Hold the button until the TPMS warning light blinks three times, then release.
  4. Start the vehicle and allow it to run for a few minutes.

Repair Instructions:

If Tire Pressure is Low:

Inflate the tire(s) to the recommended pressure using an air compressor.
Recheck tire pressure after inflation.
Reset the TPMS as described above.

If a Leak is Found:

Puncture Repair:
- If a puncture is found, consider using a tire repair kit or taking the tire to a professional for repair.
- Ensure the tire is properly sealed and remount it on the vehicle if removed.
Sensor Replacement:
- If the TPMS sensor is determined to be faulty, follow these steps:
  - Remove the tire from the wheel using a tire machine.
  - Replace the TPMS sensor (ensure to purchase the correct part).
  - Reinstall the tire and ensure proper inflation.
  - Reset the TPMS.

If No Issues Found:

If all tires are properly inflated and no leaks are detected, but the light remains on, the TPMS system may need to be scanned for diagnostic codes using a TPMS scanner. This will indicate if any specific sensors are malfunctioning.

Final Note:

After resolving the issue, monitor the tire pressure regularly and check the TPMS warning light. If the light remains on after addressing all potential issues, consult with a professional technician or Toyota dealer for further diagnosis.