FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What causes the engine to hesitate during acceleration in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What causes the engine to hesitate during acceleration in a 2019 Toyota Camry?

What causes the engine to hesitate during acceleration in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
714 words

Problem Statement

Learn how to diagnose and fix engine hesitation during acceleration in a 2019 Toyota Camry, including symptoms, possible causes, and step-by-step diagnostic procedures.

Affected Component
Engine
Estimated Time
2-4 hours

Symptoms

  • •A noticeable lag when pressing the accelerator pedal
  • •Engine stuttering or misfiring
  • •Lack of power during acceleration
  • •Unusual engine sounds (e.g., sputtering)
  • •Check Engine Light (CEL) may be illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Fuel pressure gauge
  • •Vacuum gauge
  • •Basic hand tools (screwdrivers, wrenches, ratchet set)
  • •Torque wrench
  • •Replacement parts as necessary

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing Engine Hesitation During Acceleration in a 2019 Toyota Camry

Possible Causes

  1. Fuel Delivery Issues

    • Clogged fuel filter
    • Failing fuel pump
    • Dirty fuel injectors

  2. Air Intake Problems

    • Clogged air filter
    • Faulty mass airflow sensor (MAF)
    • Vacuum leaks

  3. Ignition System Faults

    • Worn spark plugs
    • Faulty ignition coils
    • Bad spark plug wires

  4. Sensor Malfunctions

    • Faulty throttle position sensor (TPS)
    • Engine coolant temperature sensor (ECT) issues

  5. Transmission Issues

    • Low transmission fluid
    • Transmission slipping
Tools Required
  • OBD-II scanner
  • Multimeter
  • Fuel pressure gauge
  • Vacuum gauge
  • Basic hand tools (screwdrivers, wrenches, ratchet set)
  • Torque wrench
  • Replacement parts as necessary
Step 1: Check for Diagnostic Trouble Codes (DTCs)
  1. Connect the OBD-II scanner to the vehicle’s OBD-II port (usually located under the dashboard).
  2. Read any stored codes and note them. Focus on codes related to fuel, air intake, and ignition systems.
  3. Clear the codes and take the car for a short drive to see if any codes reappear.
Step 2: Inspect Fuel System

  1. Fuel Pressure Check:

    • Attach the fuel pressure gauge to the fuel rail.
    • Turn the ignition to the "ON" position (do not start the engine) and check the pressure. Refer to the manufacturer specs (typically around 50-60 PSI).
    • If low, check the fuel pump and filter.

  2. Inspect Fuel Injectors:

    • Remove the fuel injectors and inspect for clogs or leaks.
    • Perform a cleaning if necessary or replace if faulty.
Step 3: Inspect Air Intake System

  1. Check Air Filter:

    • Locate and remove the air filter. Inspect for dirt or blockages. Replace if necessary.

  2. Mass Airflow Sensor (MAF):

    • Locate the MAF sensor (usually between the air filter and throttle body).
    • Disconnect the sensor and clean it with MAF sensor cleaner.
    • Reconnect and take the car for a test drive to see if symptoms persist.

  3. Vacuum Leaks:

    • Use a vacuum gauge to check for leaks in the intake system.
    • Inspect hoses and connections for any signs of wear or damage.
Step 4: Check Ignition System

  1. Inspect Spark Plugs:

    • Remove each spark plug and check for wear, carbon build-up, or damage.
    • Replace plugs that are worn or fouled.

  2. Test Ignition Coils:

    • Use a multimeter to test the resistance of each coil according to the specifications in the service manual.
    • Replace any coils that are out of spec.
Step 5: Sensor Testing

  1. Throttle Position Sensor (TPS):

    • Locate the TPS on the throttle body.
    • Use a multimeter to test the voltage output as you slowly open the throttle. It should show a smooth increase in voltage.
    • Replace if there is a sudden drop or inconsistency.

  2. Engine Coolant Temperature Sensor:

    • Check the resistance of the ECT sensor at various temperatures and compare it to the manufacturer’s specifications.
    • Replace if readings are out of spec.
Step 6: Check Transmission Fluid
  1. Fluid Level Check:
    • With the engine running, remove the transmission dipstick and check fluid level.
    • If low, top up with the manufacturer-recommended transmission fluid.
  2. Fluid Condition Inspection:
    • Check for burnt smell or metal particles in the fluid. If present, consider a transmission service.
Repair Instructions
  1. Replace any faulty components identified during diagnostics (fuel injectors, air filter, MAF, spark plugs, ignition coils, etc.).
  2. Reassemble any parts that were removed during the inspection.
  3. Clear any DTCs from the OBD-II scanner after repairs.
  4. Test Drive the vehicle to confirm that the engine hesitation issue has been resolved.
Final Checks
  • After repairs, monitor the vehicle for any reoccurrence of symptoms.
  • Consider performing a full system diagnostic if the problem persists.

By following the above steps, you should be able to effectively identify and resolve the issue causing engine hesitation during acceleration in your 2019 Toyota Camry.