FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the signs of a failing ignition coil in a 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the signs of a failing ignition coil in a 2020 Toyota Camry?

What are the signs of a failing ignition coil in a 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
685 words

Problem Statement

Learn about the symptoms of a failing ignition coil in a 2020 Toyota Camry and how to diagnose and replace it effectively.

Affected Component
ignition coil
Estimated Time
2-3 hours

Symptoms

  • •Engine Misfiring
  • •Reduced Engine Power
  • •Check Engine Light
  • •Poor Fuel Economy
  • •Hard Starting
  • •Rough Idle
  • •Unusual Smells

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Inspection mirror
  • •OBD-II scanner
  • •Multimeter
  • •Ignition coil tester (optional)
  • •Socket set
  • •Spark plug gap tool
  • •Ratchet and socket set
  • •Torque wrench
  • •Dielectric grease

Additional Information

Affected Component
ignition coil
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
10 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Signs of a Failing Ignition Coil in a 2020 Toyota Camry

When the ignition coil begins to fail in your 2020 Toyota Camry, you may experience a variety of symptoms that can impact the vehicle's performance. Here are the key signs to look out for:

1. Visual Inspection
  • Tools Required: Flashlight, inspection mirror.
  • Check the ignition coils for any visible damage, cracks, or corrosion.
  • Inspect the wiring and connectors for signs of wear or disconnection.
2. OBD-II Scanner
  • Tools Required: OBD-II scanner.
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Retrieve and note any trouble codes, particularly those related to cylinder misfires (e.g., P0301 for cylinder 1, P0302 for cylinder 2, etc.).
3. Ignition Coil Testing
  • Tools Required: Multimeter, ignition coil tester (optional).
  • Disconnect the negative battery terminal.
  • Remove the ignition coil from the spark plug (note that you may need to remove engine covers).
  • Use a multimeter to measure the resistance across the primary and secondary terminals of the ignition coil. Compare the readings with the specifications in the service manual.
  • An alternative method is to use an ignition coil tester to check for proper spark generation.
4. Spark Plug Inspection
  • Tools Required: Socket set, spark plug gap tool.
  • Inspect the condition of the spark plugs, as a failing ignition coil can cause excessive wear on them.
  • Replace any fouled or worn spark plugs.
5. Swap Test
  • If you suspect a specific coil is faulty, swap it with a known good coil from another cylinder.
  • Clear the trouble codes and perform a test drive to see if the misfire follows the coil.
Repair Instructions

If you confirm that the ignition coil is failing, follow these repair steps:

1. Gather Required Tools and Parts
  • Tools Required: Ratchet and socket set, torque wrench, dielectric grease.
  • Parts Needed: Replacement ignition coil(s), new spark plugs (if needed).
2. Disconnect Battery
  • Disconnect the negative terminal of the battery to prevent any electrical shorts.
3. Remove Ignition Coil
  • Remove any engine covers if necessary.
  • Carefully disconnect the electrical connector from the ignition coil.
  • Unbolt the ignition coil from the engine using the appropriate socket.
  • Gently pull the ignition coil out from its mounting location.
4. Install New Ignition Coil
  • Apply a small amount of dielectric grease on the bottom of the new ignition coil terminal.
  • Insert the new ignition coil into the mounting location, aligning it properly.
  • Secure the ignition coil with the mounting bolts and connect the electrical connector.
5. Reinstall Components
  • Reinstall any engine covers that were removed.
  • Reconnect the negative battery terminal.
6. Test the Vehicle
  • Start the engine and monitor its performance.
  • Check for any trouble codes using the OBD-II scanner.
  • Take the vehicle for a test drive to ensure that the symptoms have been resolved.
7. Final Inspection
  • After the test drive, check for any leaks or abnormal sounds.
  • Confirm that the check engine light remains off.

By following these steps, you can effectively diagnose and replace a failing ignition coil in a 2020 Toyota Camry, restoring proper engine function and performance.