FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common tire pressure monitoring system faults in the 2019 Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common tire pressure monitoring system faults in the 2019 Camry?

What are the common tire pressure monitoring system faults in the 2019 Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
790 words

Problem Statement

Learn about common tire pressure monitoring system faults in the 2019 Toyota Camry, including symptoms, diagnostic steps, and repair instructions.

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
2-4 hours

Symptoms

  • •TPMS Warning Light illuminates
  • •Inconsistent Tire Pressure Readings
  • •Frequent Warning Light Activation
  • •System Malfunction Warning

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •OBD-II scanner with TPMS capabilities
  • •Tire inflator
  • •Basic hand tools (wrench set, screwdriver)
  • •Multimeter
  • •Replacement TPMS sensors (if necessary)

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Tire Pressure Monitoring System (TPMS) Faults in the 2019 Toyota Camry
Common Causes of TPMS Faults
  1. Low Tire Pressure: One or more tires are under-inflated.
  2. Faulty TPMS Sensors: Sensors may become defective or damaged.
  3. Dead Sensor Batteries: TPMS sensors have batteries that can wear out over time.
  4. Signal Interference: Electronic interference may disrupt communication between sensors and the ECU.
  5. Improper Tire Installation: Incorrect installation of tires or sensors can lead to faults.
  6. Damaged Wiring: Wiring issues can prevent signals from reaching the ECU.
  7. TPMS Module Malfunction: The main control module for the TPMS may be faulty.

Step 1: Gather Tools
  • Tire pressure gauge
  • OBD-II scanner with TPMS capabilities
  • Tire inflator
  • Basic hand tools (wrench set, screwdriver)
  • Multimeter (for wiring issues)
  • Replacement TPMS sensors (if necessary)
Step 2: Check Tire Pressures
  1. Remove Valve Caps: Carefully remove the valve caps from each tire.
  2. Measure Tire Pressure: Use a tire pressure gauge to check the pressure in all four tires.
  3. Compare Readings: Compare the readings with the specifications found on the driver’s side door jamb.
  4. Inflate Tires as Necessary: Inflate any tire that is below the recommended pressure.
Step 3: Scan for Codes
  1. Connect OBD-II Scanner: Plug the scanner into the OBD-II port under the dashboard.
  2. Read TPMS Codes: Access the TPMS module and check for any stored fault codes.
  3. Document Codes: Write down any codes that are displayed for further analysis.
Step 4: Inspect TPMS Sensors
  1. Visual Inspection: Examine each tire for visible damage to the valve stem and sensor.
  2. Use a TPMS Tool: If available, use a TPMS tool to activate each sensor and check for response.
  3. Check Battery Levels: If the tool indicates a failure, consider the possibility of a dead battery within the sensor.
Step 5: Check Wiring and Connections
  1. Inspect Wiring: Check the wiring harness connecting to the TPMS module for any damage or corrosion.
  2. Use a Multimeter: Test continuity in the wiring harness to ensure there are no breaks.
Step 6: Reset TPMS
  1. Follow Reset Procedure: If all tires are properly inflated and sensors are functional, reset the TPMS.
    • Turn the ignition to the "On" position without starting the engine.
    • Locate the TPMS reset button (usually under the dashboard or near the steering column).
    • Press and hold the button until the TPMS light blinks three times, then release.
    • Drive the vehicle for a few minutes to allow the system to recalibrate.

Repair Instructions
Replacing Faulty TPMS Sensors
  1. Remove Tires: Use a tire changer or jack to lift the vehicle and remove the wheel with the faulty sensor.
  2. Unseat the Tire: Use tire levers to break the bead and unseat the tire from the rim.
  3. Remove Old Sensor: Unscrew the valve stem nut and remove the sensor from the tire.
  4. Install New Sensor: Place the new sensor in the valve stem hole and secure it with the nut.
  5. Re-seat the Tire: Carefully re-seat the tire onto the rim and inflate it to the correct pressure.
  6. Reinstall Tire: Mount the tire back onto the vehicle and torque the lug nuts to the manufacturer’s specifications.
Replacing TPMS Module (if necessary)
  1. Locate TPMS Module: Refer to the service manual to find the TPMS control module’s location (usually under the dashboard).
  2. Disconnect Battery: Disconnect the negative terminal of the battery to ensure safety.
  3. Remove Module: Take out the screws or bolts securing the module and disconnect the wiring harness.
  4. Install New Module: Connect the new TPMS module and secure it in place.
  5. Reconnect Battery: Reconnect the negative battery terminal.
  6. Recalibrate System: Follow the TPMS reset procedure to ensure proper operation.
Final Verification
  1. Test Drive: After repairs, take the vehicle for a test drive to confirm that the TPMS light turns off.
  2. Re-check Tire Pressures: After driving, re-check the tire pressures for consistency with the TPMS readings.

These steps should help you diagnose and repair common TPMS faults in a 2019 Toyota Camry. Always refer to the specific service manual for detailed specifications and procedures as they can vary by model and trim level.