FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common suspension issues in a 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common suspension issues in a 2020 Toyota Camry?

What are the common suspension issues in a 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
5 min read
917 words

Problem Statement

Learn about common suspension issues in the 2020 Toyota Camry, including symptoms, diagnostic steps, tools required, and repair instructions.

Affected Component
suspension

Symptoms

  • •Excessive bouncing after hitting bumps
  • •Nose diving during braking
  • •Rear-end squatting during acceleration
  • •Clunking noises over bumps
  • •Steering wandering
  • •Uneven tire wear
  • •Vehicle sagging on one side
  • •Excessive body roll during cornering
  • •Poor ride quality
  • •Clunking noise during turns
  • •Increased body roll
  • •Poor handling
  • •Vehicle pulling to one side
  • •Steering wheel off-center

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Wrench set
  • •Torque wrench
  • •Socket set
  • •Pry bar
  • •Spring compressor (if necessary)
  • •Alignment rack (for professional use)
  • •Level and measuring tape (for DIY)

Additional Information

Affected Component
suspension
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Common Suspension Issues in a 2020 Toyota Camry (Eighth Generation - XV70)

The suspension system in a 2020 Toyota Camry plays a crucial role in providing a comfortable ride and maintaining vehicle control. Over time, several issues can arise due to wear and tear, driving conditions, and component quality. Below are common suspension issues, their symptoms, diagnostic steps, tools required, and repair instructions.

Common Suspension Issues
  1. Worn Shock Absorbers/Struts
  2. Bad Control Arms/Bushings
  3. Broken or Worn Springs
  4. Loose or Damaged Sway Bar Links
  5. Misalignment Issues
1. Worn Shock Absorbers/Struts
Tools Required:
  • Jack and jack stands
  • Wrench set
  • Torque wrench
  • Socket set
Repair Instructions:
  1. Lift the Vehicle: Use the jack to lift the car and secure it with jack stands.
  2. Remove the Wheel: Use a socket set to remove the lug nuts and take off the wheel.
  3. Disconnect the Shock/Strut: Remove any bolts securing the shock/strut to the suspension and the top mount under the hood.
  4. Install New Shock/Strut: Position the new shock/strut in place and torque the bolts to the manufacturer's specifications.
  5. Reattach the Wheel: Replace the wheel and lug nuts, and lower the vehicle. Ensure all components are reassembled and torqued correctly.
2. Bad Control Arms/Bushings
Tools Required:
  • Socket set
  • Pry bar
  • Torque wrench
  • Wrench set
Repair Instructions:
  1. Lift the Vehicle: Raise the vehicle and secure with jack stands.
  2. Remove the Wheel: Take off the wheel to access the control arm.
  3. Disconnect the Control Arm: Unbolt the control arm from the frame and the steering knuckle. Use a pry bar if necessary.
  4. Replace Bushings: If only the bushings are bad, remove the old bushings and press in new ones using a bushing tool.
  5. Install New Control Arm: Attach the new control arm, torque the bolts to specifications, and reassemble the wheel.
3. Broken or Worn Springs
Tools Required:
  • Jack and jack stands
  • Spring compressor (if necessary)
  • Socket set
  • Torque wrench
Repair Instructions:
  1. Lift the Vehicle: Raise the vehicle and secure it with jack stands.
  2. Remove the Wheel: Take off the wheel to access the springs.
  3. Remove the Shock/Strut Assembly: Unbolt and carefully remove the shock/strut assembly using appropriate tools.
  4. Compress the Spring (if applicable): Use a spring compressor to safely compress the spring before removal.
  5. Replace the Spring: Install the new spring, decompress it, and reassemble the shock/strut assembly.
  6. Reattach the Wheel: Finally, put the wheel back on, lower the vehicle, and ensure everything is tightened correctly.
4. Loose or Damaged Sway Bar Links
Tools Required:
  • Socket set
  • Wrench set
  • Torque wrench
Repair Instructions:
  1. Lift the Vehicle: Raise the vehicle and secure it with jack stands.
  2. Remove the Wheel (if necessary): Take off the wheel for better access to the sway bar links.
  3. Unbolt the Sway Bar Links: Use a socket set to remove the bolts securing the sway bar links.
  4. Install New Sway Bar Links: Attach the new links and torque them to manufacturer specifications.
  5. Reattach the Wheel: Replace the wheel and lower the vehicle.
5. Misalignment Issues
Tools Required:
  • Alignment rack (for professional use)
  • Level and measuring tape (for DIY)
Repair Instructions:
  1. If a misalignment is detected, it is recommended to take the vehicle to a professional alignment shop.
  2. If doing it yourself, adjust the tie rods and control arms as needed to achieve proper alignment specifications.
Conclusion

Regular maintenance and prompt attention to suspension issues are crucial for the performance and safety of your 2020 Toyota Camry. If you're not comfortable performing these repairs yourself, it's advisable to consult a certified automotive technician.