FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Camry Eighth Generation (2018-present) headlights keep flickering - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/my Toyota Camry Eighth Generation (2018-present) headlights keep flickering

my Toyota Camry Eighth Generation (2018-present) headlights keep flickering

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
511 words

Problem Statement

Learn how to diagnose and fix flickering headlights in Toyota Camry Eighth Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shocks.
  • •Allow the engine to cool before inspecting or replacing components near the engine.

Symptoms

  • •Headlights flickering on and off
  • •Dimming or brightening of headlights
  • •Dashboard lights flickering in sync with headlights
  • •Possible blown fuses
  • •Increased electrical load on the battery

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdrivers
  • •Electrical tape

Parts Required

  • •Headlight bulbs
  • •Headlight relay
  • •Battery (if faulty)
  • •Alternator (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the negative battery cable to prevent electrical shock.
2. Inspect and Replace Headlight Bulbs
  • Remove the headlight assembly by unscrewing the retaining screws.
  • Disconnect the electrical connector from the bulb.
  • Remove the old bulb and install a new bulb, ensuring it is properly seated.
  • Reconnect the electrical connector and reassemble the headlight assembly.
3. Check and Replace Headlight Relay
  • Locate the fuse box under the hood and identify the headlight relay.
  • Remove the relay and test it with a multimeter for continuity.
  • If faulty, replace it with a new relay of the same specifications.
4. Inspect and Repair Wiring
  • Visually inspect the wiring harness connected to the headlights for any visible damage.
  • Repair any frayed or damaged wires using electrical tape or by replacing sections of the harness.
  • Ensure all connectors are clean and securely fastened.
5. Test and Replace Battery if Necessary
  • Use a multimeter to check the battery voltage; it should read between 12.4V and 12.7V when fully charged.
  • If the voltage is below this range, replace the battery with a compatible model.
6. Check and Replace Alternator if Necessary
  • Measure the alternator output; it should be between 13.8V and 14.4V while the engine is running.
  • If the voltage is outside this range, replace the alternator with a new one.