how to reset the tire pressure light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

379 words

Problem Statement

Learn how to reset the tire pressure light on your Toyota Camry (2018-present). Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Tire Pressure Monitoring System

Estimated Time

15-30 minutes

Important safety information - read before proceeding

1
Verify the current tire pressures using a tire pressure gauge.
2
Inspect each tire visually for damage or leaks.
3
If necessary, inflate tires to the recommended pressure as indicated on the driver’s side door jamb.
4
Check the vehicle’s owner manual for the specific reset procedure for the tire pressure monitoring system (TPMS).

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Verify the current tire pressures using a tire pressure gauge.
2
Inspect each tire visually for damage or leaks.
3
If necessary, inflate tires to the recommended pressure as indicated on the driver’s side door jamb.
4
Check the vehicle’s owner manual for the specific reset procedure for the tire pressure monitoring system (TPMS).

Solution

1. Preparation

2. Reset the Tire Pressure Monitoring System (TPMS)

Turn the Ignition On: Insert the key and turn it to the "On" position without starting the engine.
Locate the TPMS Reset Button: The reset button is typically located beneath the steering column or on the lower dashboard.
Press and Hold the Button: Press and hold the TPMS reset button until the tire pressure light blinks three times, then release.
Start the Engine: Turn the ignition to the "Off" position, then start the engine.
Verify the Light: The tire pressure warning light should turn off within a few minutes after driving.