how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present)?

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

370 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this simple step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (or 'Neutral') and on a flat surface when performing this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No other performance issues affecting the vehicle

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer displays the total mileage, not the trip mileage.
3
Turn off the ignition.
4
Press and hold the trip meter reset button on the dashboard.
5
While holding the trip meter button, turn the ignition switch back to the 'ON' position.
6
Continue holding the trip meter reset button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure that the odometer displays the total mileage, not the trip mileage.
3
Turn off the ignition.
4
Press and hold the trip meter reset button on the dashboard.
5
While holding the trip meter button, turn the ignition switch back to the 'ON' position.
6
Continue holding the trip meter reset button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface with the engine off.

2. Resetting the Maintenance Light

Turn Ignition On
- Turn the ignition switch to the "ON" position but do not start the engine.
Check Odometer Display
- Make sure the odometer is showing the total mileage (not trip A or trip B).
Turn Off Ignition
- Turn the ignition back to the "OFF" position.
Press and Hold Trip Meter Button
- Locate the trip meter reset button on the dashboard and press it. Hold it down.
Turn Ignition On Again
- While still holding the trip meter button, turn the ignition back to the "ON" position.
Wait for Light to Reset
- Continue holding the button until the maintenance light starts to blink and then turns off, indicating a successful reset.