how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

343 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this simple step-by-step guide. Quick and easy procedure.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification for scheduled maintenance displayed
•Engine oil change reminder

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'Start' button twice without pressing the brake pedal to enter the 'ON' position.
3
Navigate to the trip meter display using the odometer button.
4
Reset the trip meter to 'Trip A' if it is not already selected.
5
Turn the ignition back to the 'OFF' position.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press the 'Start' button twice without pressing the brake pedal to enter the 'ON' position.
3
Navigate to the trip meter display using the odometer button.
4
Reset the trip meter to 'Trip A' if it is not already selected.
5
Turn the ignition back to the 'OFF' position.

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked safely and the ignition is off.

2. Access the Maintenance Reset Function

Turn the Ignition On:
- Press the "Start" button twice without pressing the brake pedal, placing the vehicle in the "ON" position.
Select Trip A:
- Use the odometer button located on the instrument cluster to toggle until "Trip A" is displayed.

3. Reset the Maintenance Light

Reset the Trip Meter:
- While "Trip A" is displayed, press and hold the odometer button until the trip meter resets to "0.0".
Turn Off the Ignition:
- Once the trip meter is reset, turn the ignition back to the "OFF" position.
Verify Reset:
- Turn the ignition back to the "ON" position to check that the maintenance light is off.