how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

295 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-2023) with this simple step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in a stationary position and in 'Park' (for automatic transmissions) before starting this procedure.

•Maintenance light illuminated on the dashboard
•Notification of required maintenance displayed on the multi-information display
•Engine oil change or service reminder alert

1
Ensure the vehicle is in a safe location and the engine is turned off.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to enter the 'On' position.
3
Locate the trip meter reset button on the dashboard.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

2. Reset the Maintenance Light

Press the trip meter reset button until the trip meter displays "Trip A."
Turn off the ignition.
While holding the trip meter reset button, turn the ignition back to the "On" position without starting the engine.
Continue holding the trip meter reset button until the maintenance light turns off (this may take about 10 seconds).
Release the trip meter reset button. The maintenance light should now be reset.