how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)?

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this simple step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No other performance issues or symptoms present

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Press the power button without pressing the brake pedal to turn on the accessory mode.
3
Navigate to the odometer display and ensure it is set to the trip A odometer by pressing the trip reset button.
4
Turn the ignition off again.
5
While pressing and holding the trip reset button, turn the ignition back on to the accessory mode (without starting the engine).
6
Continue holding the trip reset button until the maintenance light flashes and then goes out.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Press the power button without pressing the brake pedal to turn on the accessory mode.
3
Navigate to the odometer display and ensure it is set to the trip A odometer by pressing the trip reset button.
4
Turn the ignition off again.
5
While pressing and holding the trip reset button, turn the ignition back on to the accessory mode (without starting the engine).
6
Continue holding the trip reset button until the maintenance light flashes and then goes out.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is in a safe and stable position.

2. Accessing the Ignition

Sit in the driver’s seat and ensure all doors are closed.
Insert the key or press the power button to turn on the vehicle to accessory mode without starting the engine.

3. Resetting the Maintenance Light

Locate the trip reset button on the dashboard.
Press the trip reset button until the display shows "Trip A."
Turn off the ignition completely.
Press and hold the trip reset button again while turning the ignition back to accessory mode.
Observe the maintenance light; it will flash and then turn off.