how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

348 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-2023) with this simple step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder display showing maintenance due message
•Engine oil change notification displayed

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position (do not start the engine).
3
Locate the odometer display on the dashboard.
4
Press the gas pedal three times quickly while the ignition is in the 'ON' position.
5
Observe the maintenance light; it should turn off after the third pedal press.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position (do not start the engine).
3
Locate the odometer display on the dashboard.
4
Press the gas pedal three times quickly while the ignition is in the 'ON' position.
5
Observe the maintenance light; it should turn off after the third pedal press.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked safely and the engine is off.

2. Turn Ignition to ON

Insert the key into the ignition.
Turn the key to the "ON" position without starting the engine.

3. Access Odometer

Locate the odometer display on the dashboard.
Ensure that the odometer is showing the total mileage (not trip A or trip B).

4. Reset Maintenance Light

Press the gas pedal three times within five seconds while the ignition is still in the "ON" position.
Observe for the maintenance light to turn off, indicating successful reset.