how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

385 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-2023) with this quick and easy step-by-step guide.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing this procedure to avoid distractions.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•Service reminder notification may appear

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine (position II).
2
Press the odometer button until the trip meter is displayed.
3
Turn off the ignition.
4
While holding the odometer button, turn the ignition back to the 'On' position.
5
Continue holding the odometer button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'On' position without starting the engine (position II).
2
Press the odometer button until the trip meter is displayed.
3
Turn off the ignition.
4
While holding the odometer button, turn the ignition back to the 'On' position.
5
Continue holding the odometer button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure all maintenance tasks have been performed, such as oil change, filter replacements, etc.

2. Resetting the Maintenance Light

Turn the Ignition On
- Insert the key or press the start button to turn the ignition to the "On" position without starting the engine.
Display the Trip Meter
- Press the odometer button on the instrument panel until the trip meter is displayed. Make sure the trip A or trip B is selected.
Turn Off the Ignition
- Turn the ignition off completely.
Hold the Odometer Button
- While still holding the odometer button, turn the ignition back to the "On" position.
Observe the Maintenance Light
- Keep holding the button until the maintenance light blinks and then goes out. This may take a few seconds.

3. Finalize

Release the odometer button after the light has turned off.
Turn off the ignition and then start the engine to ensure the maintenance light is no longer illuminated.