how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)?

Toyota Camry Eighth Generation (2018-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

374 words

Problem Statement

Learn how to reset the maintenance light on your 2018-present Toyota Camry Eighth Generation with this step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location when performing this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No other engine or system warning lights present
•Maintenance light remains on despite performing required service

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip meter reset button on the dashboard.
3
Turn the ignition switch to 'OFF'.
4
Press and hold the trip meter reset button while turning the ignition back to the 'ON' position.
5
Continue holding the button until the maintenance light turns off or resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Trip meter reset button

Parts Required

•No parts required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the trip meter reset button on the dashboard.
3
Turn the ignition switch to 'OFF'.
4
Press and hold the trip meter reset button while turning the ignition back to the 'ON' position.
5
Continue holding the button until the maintenance light turns off or resets.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the ignition is off.
Have the trip meter reset button identified.

2. Resetting the Maintenance Light

Turn Ignition On
- Without starting the engine, turn the ignition switch to the "ON" position.
Press Trip Meter Reset Button
- Locate the trip meter reset button on the instrument panel.
- Press and hold the trip meter reset button.
Turn Ignition Off
- While holding the trip meter reset button, turn the ignition switch to the "OFF" position.
Turn Ignition On Again
- Still holding the trip meter reset button, turn the ignition switch back to the "ON" position.
Release the Button
- Continue holding the trip meter reset button until the maintenance light blinks and turns off, then release the button.