how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

327 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry Eighth Generation (2018-present) with this step-by-step guide.

Affected Component

Electrical

Estimated Time

5 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (automatic) or neutral (manual) and the parking brake is engaged before performing the reset.

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the odometer reset button on the instrument panel.
3
While holding the button, turn the ignition switch to the 'ON' position without starting the engine.
4
Continue to hold the odometer reset button until the maintenance light blinks and goes off.
5
Release the odometer reset button.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the odometer reset button on the instrument panel.
3
While holding the button, turn the ignition switch to the 'ON' position without starting the engine.
4
Continue to hold the odometer reset button until the maintenance light blinks and goes off.
5
Release the odometer reset button.

Solution

1. Preparation

2. Reset Maintenance Light

Step 1: Turn the ignition switch to the "OFF" position.
Step 2: Press and hold the odometer reset button located on the instrument panel.
Step 3: While holding the odometer reset button, turn the ignition switch to the "ON" position (do not start the engine).
Step 4: Continue to hold the button until the maintenance light flashes and goes off, which typically takes about 10 seconds.
Step 5: Release the odometer reset button once the light is off.