how to reset my Toyota Camry Eighth Generation (2018-present) maintenance light

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

355 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (or 'Neutral' for manual transmissions) before turning the ignition on.

Symptoms

•Maintenance light illuminated on the dashboard
•Vehicle indicating need for service
•No engine performance issues or faults present

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Ensure that the odometer is displayed on the instrument cluster.
3
Turn off the ignition.
4
Press and hold the trip reset button on the instrument cluster.
5
While holding the trip reset button, turn the ignition back to the 'ON' position.
6
Continue holding the trip reset button until the maintenance light flashes and then goes off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Ensure that the odometer is displayed on the instrument cluster.
3
Turn off the ignition.
4
Press and hold the trip reset button on the instrument cluster.
5
While holding the trip reset button, turn the ignition back to the 'ON' position.
6
Continue holding the trip reset button until the maintenance light flashes and then goes off.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: none required for this process.

2. Reset Maintenance Light

Turn Ignition On
- Insert the key and turn it to the "ON" position. Do not start the engine.
Display Odometer
- Confirm that the odometer reading is visible on the dashboard.
Power Off Ignition
- Turn off the ignition completely.
Press and Hold Trip Reset Button
- Locate the trip reset button on the instrument cluster and press it down firmly.
Turn Ignition On Again
- While still holding the trip reset button, turn the ignition back to the "ON" position.
Release Button
- Keep holding the trip reset button until the maintenance light begins to flash, then turns off.

3. Completion

Verify that the maintenance light is no longer illuminated.