how to reset maintenance light on Toyota Camry Eighth Generation (2018-present)?

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

396 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this step-by-step guide. Ensure your vehicle's maintenance records are up to date.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light remains illuminated on the dashboard
•No additional warning lights are present
•Vehicle runs normally but requires light reset for record-keeping

Diagnostic Steps

1
Ensure the vehicle is parked and the engine is turned off.
2
Insert the key fob into the ignition (or press the start button without pressing the brake pedal) to turn the ignition to the 'ON' position.
3
Locate the trip meter reset button on the instrument panel.
4
Press and hold the trip meter reset button until the odometer reading is displayed.
5
While holding the trip meter reset button, turn the ignition switch to the 'OFF' position and then back to 'ON' without starting the engine.
6
Continue holding the trip meter reset button until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None required for resetting the maintenance light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked and the engine is turned off.
2
Insert the key fob into the ignition (or press the start button without pressing the brake pedal) to turn the ignition to the 'ON' position.
3
Locate the trip meter reset button on the instrument panel.
4
Press and hold the trip meter reset button until the odometer reading is displayed.
5
While holding the trip meter reset button, turn the ignition switch to the 'OFF' position and then back to 'ON' without starting the engine.
6
Continue holding the trip meter reset button until the maintenance light blinks and then turns off.

Solution

1. Preparation

Ensure the vehicle is in a safe and quiet location.
Gather the necessary tools (if required, such as a key fob).

2. Ignition Position

Insert the key fob into the ignition (or press the start button without the brake).
Turn the ignition to the "ON" position (do not start the engine).

3. Trip Meter Reset

Press and hold the trip meter reset button until the odometer reading appears.
Keep holding the button.

4. Ignition Cycle

While continuing to hold the reset button, turn the ignition switch to "OFF".
Turn the ignition back to "ON" without starting the vehicle.

5. Final Reset

Continue holding the trip meter reset button until the maintenance light blinks and turns off.
Release the reset button.