FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on Toyota Camry Eighth Generation (2018-present) - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/how to reset maintenance light on Toyota Camry Eighth Generation (2018-present)

how to reset maintenance light on Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
399 words

Problem Statement

Learn how to reset the maintenance light on a Toyota Camry (2018-present) with this step-by-step guide. Quick and easy instructions for your vehicle.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' to prevent any movement while performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed
  • •Potential confusion regarding service interval tracking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required, but an OBD-II scanner may be used for additional diagnostics.

Parts Required

  • •No parts are required for resetting the maintenance light.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the necessary tools, if required (e.g., OBD-II scanner, if applicable).
  • Ensure the vehicle is parked on a level surface with the engine off.
2. Resetting the Maintenance Light

  1. Turn on the Ignition:

    • With the vehicle in "Park," press the ignition button to turn the vehicle to the "ON" position without starting the engine.

  2. Select Odometer Display:

    • Use the odometer button to cycle through until the odometer reading is displayed.

  3. Turn Off the Engine:

    • Turn off the ignition completely.

  4. Press and Hold the Gas Pedal:

    • Press down on the gas pedal fully and hold it.

  5. Turn on the Ignition Again:

    • While continuing to hold the gas pedal, turn the ignition switch back to the "ON" position.

  6. Watch for the Maintenance Light:

    • Keep holding the gas pedal until the maintenance light blinks and then turns off.

  7. Release the Gas Pedal:

    • Once the maintenance light is off, release the gas pedal.