FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the P0708 code on my Toyota Camry Eighth Generation (2018-present) - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/how to fix the P0708 code on my Toyota Camry Eighth Generation (2018-present)

how to fix the P0708 code on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
high
Severity
Error Code: P0708
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
503 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0708 transmission range sensor issues in Toyota Camry. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0708
Affected Component
Transmission
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the transmission area.

Symptoms

  • •Check engine light illuminated
  • •Erratic shifting or failure to shift
  • •Transmission stuck in a single gear
  • •Delayed engagement when shifting from park to drive/reverse
  • •Unusual noises from the transmission area

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Torque wrench

Parts Required

  • •Transmission range sensor
  • •Transmission fluid

Additional Information

Error Code
P0708
Affected Component
Transmission
Estimated Time
1-2 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to ensure safety during the repair.
2. Inspect and Replace Transmission Range Sensor

  1. Locate the Transmission Range Sensor

    • The sensor is typically mounted on the side of the transmission.
    • Refer to the service manual for exact location details.

  2. Remove the Transmission Range Sensor

    • Disconnect the electrical connector from the sensor.
    • Remove any bolts holding the sensor in place using a socket set.
    • Carefully pull the sensor away from the transmission.

  3. Install the New Transmission Range Sensor

    • Position the new sensor in place and secure it with bolts. Torque specifications can usually be found in the vehicle's service manual.
    • Reconnect the electrical connector ensuring a tight fit.
3. Check Wiring and Connections
  • Inspect the wiring harness leading to the sensor for any signs of damage or corrosion.
  • If necessary, repair or replace any damaged wiring or connectors.
4. Refill Transmission Fluid (if applicable)
  • If fluid was lost during sensor replacement, refill the transmission with the correct type of fluid as specified in the owner’s manual.
  • Check the fluid level after running the engine for a few minutes to circulate the fluid.
5. Reconnect Battery Terminal
  • Reconnect the negative battery terminal securely.