how to fix my Toyota Camry Eighth Generation (2018-present) when the cruise control stops working?

Toyota Camry Eighth Generation (2018-present)

Error Codes

1-3 hours

Time

medium

Difficulty

medium

Severity

3 min read

591 words

Problem Statement

Learn how to diagnose and fix cruise control issues in your Toyota Camry (2018-present). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Electrical

Estimated Time

1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to avoid shock or shorts.
•Ensure the vehicle is securely supported if working under the dash or engine bay.

Symptoms

•Cruise control indicator light not illuminated
•Cruise control will not engage or set
•Intermittent or complete failure of cruise control
•Warning lights on the dashboard illuminated (e.g., check engine light)
•Erratic speed changes when cruise control is engaged

Diagnostic Steps

1
Check for any stored trouble codes using an OBD-II scanner to identify potential electronic faults.
2
Inspect the fuses related to the cruise control system for any blown fuses.
3
Verify the brake pedal switch operation, ensuring it is not stuck or malfunctioning.
4
Examine the throttle position sensor (TPS) for proper function and calibration.
5
Inspect the cruise control module and wiring for any visible damage or disconnections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Fuse puller
•Torque wrench

Parts Required

•Replacement brake pedal switch (if faulty)
•Replacement throttle position sensor (if faulty)
•Replacement cruise control module (if necessary)
•Fuses (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any stored trouble codes using an OBD-II scanner to identify potential electronic faults.
2
Inspect the fuses related to the cruise control system for any blown fuses.
3
Verify the brake pedal switch operation, ensuring it is not stuck or malfunctioning.
4
Examine the throttle position sensor (TPS) for proper function and calibration.
5
Inspect the cruise control module and wiring for any visible damage or disconnections.

Solution

1. Preparation

Gather the necessary tools and parts.
Disconnect the negative battery terminal to prevent electrical shorts.
Ensure the car is on a stable surface and secure it with wheel chocks.

2. Check Fuses

Locate the fuse box; consult the owner's manual for the specific location.
Remove the cruise control fuse using a fuse puller.
Inspect the fuse for continuity and replace it if it is blown.

3. Inspect Brake Pedal Switch

Locate the brake pedal switch, which is typically mounted on the brake pedal assembly.
Disconnect the electrical connector from the switch.
Test the switch using a multimeter; it should show continuity when the pedal is depressed.
If the switch is faulty, remove it by unscrewing it from its mount and replace it with a new one.

4. Throttle Position Sensor (TPS) Check

Locate the TPS on the throttle body.
Disconnect the electrical connector from the TPS.
Using a multimeter, measure the voltage output of the TPS while manually moving the throttle plate.
If the readings are outside the specified range, replace the TPS.

5. Inspect Cruise Control Module and Wiring

Locate the cruise control module, typically found in the engine bay or under the dashboard.
Visually inspect the wiring harness for any damaged wires or connectors.
If necessary, replace the cruise control module by disconnecting it from its mount and installing a new module.