FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot the tire pressure monitoring system in a 2022 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I troubleshoot the tire pressure monitoring system in a 2022 Toyota Camry?

How do I troubleshoot the tire pressure monitoring system in a 2022 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
616 words

Problem Statement

Learn how to troubleshoot the Tire Pressure Monitoring System (TPMS) in a 2022 Toyota Camry, including symptoms, diagnostic steps, and tools required.

Affected Component
Tire Pressure Monitoring System (TPMS)

Symptoms

  • •TPMS warning light is illuminated on the dashboard.
  • •Inaccurate tire pressure readings.
  • •Warning message displayed on the Multi-Information Display (MID).
  • •Tire pressure displayed in the MID may not match the actual tire pressure.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •OBD-II scanner (optional, for advanced diagnostics)
  • •TPMS reset tool (optional)
  • •Air compressor
  • •Basic hand tools (if sensor replacement is necessary)

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting the Tire Pressure Monitoring System (TPMS) in a 2022 Toyota Camry
Tools Required
  • Tire pressure gauge
  • OBD-II scanner (optional, for advanced diagnostics)
  • TPMS reset tool (optional)
  • Air compressor
  • Basic hand tools (if sensor replacement is necessary)

Step 1: Visual Inspection

  1. Check Tire Condition: Examine each tire for visible damage, punctures, or deformation.
  2. Inspect Valve Stems: Ensure that the valve stems are not cracked or damaged and that they are not leaking.
  3. Look for Warning Messages: Check the MID for any additional warning messages related to tire pressure or the TPMS.

Step 2: Verify Tire Pressures

  1. Use a Tire Pressure Gauge: Remove the valve cap from each tire and check the pressure using a tire pressure gauge. Compare readings to the recommended pressures found on the driver’s door jamb.
  2. Inflate Tires if Necessary: If any tire is below the recommended pressure, inflate it to the appropriate level.

Step 3: Reset the TPMS

  1. Turn Ignition On: Start the vehicle or turn the ignition to the “On” position without starting the engine.
  2. Locate the TPMS Reset Button: This is typically located beneath the steering wheel or in the glove compartment.
  3. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
  4. Drive the Vehicle: Drive the vehicle for 10-15 minutes at speeds above 25 mph to allow the system to recalibrate.

Step 4: Check for DTCs (Diagnostic Trouble Codes)

  1. Connect OBD-II Scanner: If the TPMS light remains on, connect an OBD-II scanner to the vehicle's diagnostic port.
  2. Read Codes: Access the TPMS module and read any stored DTCs. Note any codes related to specific tire sensors or the system as a whole.
Repair Instructions

If Tire Pressure is Low

  1. Inflate Tires: Use an air compressor to bring the tire pressure to the recommended levels.
  2. Reset TPMS: Follow the reset procedure mentioned in Step 3.

If a Sensor is Faulty

  1. Identify Faulty Sensor: Use the OBD-II scanner to determine which tire sensor is malfunctioning.
  2. Remove the Wheel: Use a jack to lift the vehicle and remove the wheel with the faulty sensor.
  3. Replace the Sensor:
    • Remove the Tire: Dismount the tire using a tire machine if necessary.
    • Replace the TPMS Sensor: Unscrew the old sensor from the valve stem and install the new sensor. Ensure it is properly seated.
    • Reinstall the Tire: Mount the tire back on the rim and balance it.
    • Reattach the Wheel: Reinstall the wheel back onto the vehicle.
  4. Reset TPMS: After replacing the sensor, reset the TPMS using the method outlined in Step 3.

If There is a System Malfunction

  1. Inspect Wiring and Connectors: Check for any damaged wiring or loose connections associated with the TPMS module.
  2. Replace TPMS Module: If necessary, replace the TPMS control module. This may require reprogramming with the dealership or specialized equipment.
  3. Recheck System: Once repairs are made, reset the TPMS and check for any remaining issues.
Conclusion

The TPMS in the 2022 Toyota Camry is a critical system for maintaining tire safety. Following these steps will help you troubleshoot and resolve issues effectively. If problems persist after following these procedures, it may be necessary to consult a professional technician or visit a Toyota dealership for further diagnosis and repair.