FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot the keyless entry system not working on my 2019 Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I troubleshoot the keyless entry system not working on my 2019 Camry?

How do I troubleshoot the keyless entry system not working on my 2019 Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
608 words

Problem Statement

Learn how to troubleshoot and fix the keyless entry system not working on your 2019 Toyota Camry with these detailed steps and required tools.

Affected Component
keyless entry system
Estimated Time
1-2 hours

Symptoms

  • •Key fob is unresponsive when pressing the lock/unlock buttons.
  • •Door locks do not respond to the keyless entry system.
  • •Key fob unlocks the doors manually but does not trigger the keyless entry system.
  • •Warning messages on the dashboard related to the keyless entry system.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II scanner
  • •Small flat-head screwdriver
  • •Phillips screwdriver
  • •Replacement battery for key fob (typically CR2032 for Toyota)
  • •Key fob programming tool (if necessary)

Additional Information

Affected Component
keyless entry system
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting Keyless Entry System on a 2019 Toyota Camry
Tools Required
  • Multimeter
  • OBD-II scanner
  • Small flat-head screwdriver
  • Phillips screwdriver
  • Replacement battery for key fob (typically CR2032 for Toyota)
  • Key fob programming tool (if necessary)
Repair Instructions

Step 1: Check the Key Fob Battery

  1. Remove the Key Fob Cover:

    • Use a small flat-head screwdriver to gently pry apart the fob casing.

  2. Replace the Battery:

    • Remove the old battery and replace it with a new one (CR2032).
    • Ensure the battery is oriented correctly (positive side facing up).

  3. Reassemble the Key Fob:

    • Snap the key fob back together and test the functionality.

Step 2: Verify Key Fob Programming

  1. Use the OBD-II Scanner:

    • Connect the OBD-II scanner to the vehicle’s diagnostic port.
    • Check for any keyless entry-related DTCs.

  2. Reprogram the Key Fob:

    • If necessary, follow the manufacturer’s instructions to reprogram the key fob.
    • This often involves inserting the key into the ignition and performing a series of steps to enter program mode.

Step 3: Inspect for Interference

  1. Test in Different Locations:

    • Move your vehicle to different locations (away from other vehicles) to check for interference.

  2. Check for Electronics:

    • Ensure that no other electronic devices are causing interference with the key fob signal.

Step 4: Check Vehicle Battery

  1. Measure Voltage:

    • Use a multimeter to measure the vehicle battery voltage. It should read around 12.6 volts when the vehicle is off.

  2. Check Connections:

    • Inspect the battery terminals for corrosion and ensure they are tight.

Step 5: Inspect Door Lock Actuators

  1. Listen for Actuator Sounds:

    • When pressing the key fob, listen for clicking sounds from the door locks.

  2. Test Actuators Manually:

    • Use a multimeter to check the voltage going to the door lock actuators when the key fob is pressed.

Step 6: Scan for DTCs

  1. Retrieve Codes:

    • Use the OBD-II scanner to check for any trouble codes related to the keyless entry system.

  2. Address Any Codes Found:

    • Research any codes and address the underlying issues, which may involve electrical repairs or component replacements.
Conclusion

If the keyless entry system still does not work after following these steps, it may require professional diagnostics or repairs. Possible issues could include faulty wiring, a malfunctioning keyless entry module, or other electronic issues that need specialized tools and knowledge to resolve. It is advisable to consult a Toyota dealership or certified automotive technician for further assistance.