How do I resolve a power trunk issue in a 2022 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

2-3 hours

Time

medium

Difficulty

medium

Severity

4 min read

634 words

Problem Statement

Learn how to diagnose and fix power trunk issues in a 2022 Toyota Camry with step-by-step instructions and required tools.

Affected Component

trunk release system

Estimated Time

2-3 hours

Symptoms

•Trunk does not open with key fob
•Trunk does not open with the interior switch
•Physical key operation works
•No clicking sound from the trunk actuator

Diagnostic Steps

1
Check the key fob battery
2
Inspect the trunk latch
3
Test the other functions of the key fob
4
Ensure the switch is not stuck or damaged
5
Use a multimeter to check for continuity
6
Use an OBD-II scanner to check for trouble codes
7
Check the fuse related to the trunk release
8
Inspect wiring and connectors

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdrivers (Phillips and flathead)
•Pliers
•Replacement fuse
•Replacement key fob battery
•Wiring diagram for the trunk release system

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resolving Power Trunk Issue in a 2022 Toyota Camry

Tools Required

OBD-II scanner
Multimeter
Screwdrivers (Phillips and flathead)
Pliers
Replacement fuse (if necessary)
Replacement key fob battery (if necessary)
Wiring diagram for the trunk release system (if available)

Repair Instructions

Step 1: Key Fob Battery Replacement

Open the key fob using a small flathead screwdriver.
Replace the old battery (usually a CR2032) with a new one.
Snap the key fob back together and test the trunk release again.

Step 2: Check & Replace Fuse

Locate the fuse box (typically under the dashboard or in the engine compartment).
Use the fuse puller tool to remove the trunk release fuse.
Inspect the fuse; if it is blown, replace it with a fuse of the same amperage.
Test the trunk release again.

Step 3: Testing and Repairing Interior Switch

Remove the switch panel using a screwdriver to access the trunk release switch.
Disconnect the electrical connector from the switch.
Use a multimeter to test for continuity when the button is pressed.
- If the switch is defective, replace it with a new one.
Reconnect the switch and reassemble the panel.

Step 4: Inspect Wiring and Connectors

Follow the wiring harness from the interior switch to the trunk actuator.
Look for any signs of wear, fraying, or disconnections.
Repair any damaged wiring by soldering or using appropriate connectors.
Ensure all connectors are secure.

Step 5: Testing the Trunk Actuator

If the above steps do not resolve the issue, the trunk actuator might be faulty.
Access the trunk actuator by removing any necessary interior trim.
Test the actuator with a multimeter to ensure it receives power when the release is activated.
If the actuator does not function, disconnect it and replace it with a new actuator.

Step 6: Final Testing

After making repairs, test the trunk release using both the key fob and the interior button.
Ensure that the trunk opens smoothly and that there are no obstructions.

Conclusion

If the trunk still does not operate after completing these steps, further diagnostics may be necessary, possibly involving the Body Control Module (BCM) or seeking professional assistance.