how do I reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)?

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

326 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this step-by-step guide. Quick and easy instructions for maintenance light reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Engine oil change completed
•Tire rotation performed

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the odometer reset button on the dashboard.
3
While holding the button, turn the ignition key to the 'ON' position without starting the engine.
4
Wait for the maintenance light to flash and turn off, then release the odometer reset button.
5
Confirm the maintenance light is no longer illuminated.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Press and hold the odometer reset button on the dashboard.
3
While holding the button, turn the ignition key to the 'ON' position without starting the engine.
4
Wait for the maintenance light to flash and turn off, then release the odometer reset button.
5
Confirm the maintenance light is no longer illuminated.

Solution

1. Preparation

Gather necessary tools: none required for this procedure.
Ensure the vehicle is parked safely with the engine off.

2. Resetting the Maintenance Light

Turn Off the Ignition: Ensure the vehicle is completely off.
Press and Hold Odometer Reset Button: Locate the odometer reset button on the instrument panel and press it down firmly.
Turn Ignition to ON: With the button still pressed, turn the ignition key to the "ON" position without starting the engine.
Wait for Light to Reset: Observe the maintenance light on the dashboard. It should start flashing and then turn off after a few seconds.
Release the Odometer Button: Once the light turns off, release the odometer reset button.