how do I reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

336 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-2023) with this simple step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to prevent any unintended movement.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle has recently undergone maintenance

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Find the trip meter reset button on the dashboard.
3
Turn the ignition off.
4
Press and hold the trip meter reset button.
5
While holding the button, turn the ignition back to the 'ON' position.
6
Continue holding the button until the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required specifically for the reset process.

Parts Required

•None required specifically for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Find the trip meter reset button on the dashboard.
3
Turn the ignition off.
4
Press and hold the trip meter reset button.
5
While holding the button, turn the ignition back to the 'ON' position.
6
Continue holding the button until the maintenance light resets.

Solution

1. Preparation

Gather all necessary tools such as a stopwatch (optional for timing).
Ensure the vehicle is parked on a level surface and in the "ON" position without starting the engine.

2. Access the Trip Meter

Locate the trip meter reset button on the instrument panel.
Confirm that the maintenance light is illuminated.

3. Reset the Maintenance Light

Turn off the ignition completely.
Press and hold the trip meter reset button.
With the button still pressed, turn the ignition switch to the "ON" position (do not start the engine).
Hold the button for approximately 10 seconds or until the maintenance light turns off.
Release the trip meter reset button.