FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the windshield wipers not working properly in a 2021 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I fix the windshield wipers not working properly in a 2021 Toyota Camry?

How do I fix the windshield wipers not working properly in a 2021 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
616 words

Problem Statement

Learn how to diagnose and fix windshield wiper issues in your 2021 Toyota Camry with step-by-step instructions and required tools.

Affected Component
windshield wipers
Estimated Time
1-2 hours

Symptoms

  • •Wipers not moving
  • •Intermittent operation
  • •Stuttering or jerky movement
  • •Noisy operation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Flathead and Phillips screwdrivers
  • •Wrench set
  • •Replacement fuse (if necessary)
  • •Replacement wiper motor (if necessary)
  • •Replacement wiper blades (if worn)

Additional Information

Affected Component
windshield wipers
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Windshield Wipers Not Working Properly in a 2021 Toyota Camry

Step 1: Check Wiper Functionality
  • Switch on the ignition: Turn the key to the "On" position without starting the engine.
  • Test the wiper control stalk: Activate the wipers on different settings (low, high, intermittent) to see if any respond.
Step 2: Inspect the Wiper Blades
  • Visual inspection: Check for any damage or wear on the wiper blades. Look for cracks or tears.
  • Function test: Manually lift the wiper arms to see if they move freely. If they are stuck, there may be a mechanical issue.
Step 3: Check Wiper Motor Operation
  • Listen for sounds: When activating the wipers, listen for the sound of the wiper motor. If there’s no sound, the motor may be faulty.
  • Power supply check: Use a multimeter to check for voltage at the wiper motor connector while the wipers are activated. You should see around 12 volts.
Step 4: Inspect the Fuse
  • Locate the fuse box: The fuse box is typically located under the dashboard or in the engine compartment.
  • Check the fuse: Refer to the owner's manual for the specific fuse designation for the wipers and inspect it. If blown, replace it with the same amperage.
Step 5: Examine the Wiper Relay
  • Locate the relay: Find the wiper relay in the fuse box.
  • Test the relay: Swap it with another identical relay in the fuse box to see if the wipers start functioning.
Tools Required
  • Multimeter
  • Flathead and Phillips screwdrivers
  • Wrench set
  • Replacement fuse (if necessary)
  • Replacement wiper motor (if necessary)
  • Replacement wiper blades (if worn)
Repair Instructions
Replacing Wiper Blades
  1. Lift the wiper arms: Pull the wiper arms away from the windshield.
  2. Remove the old blades: Locate the release tab on the wiper blade, press it, and slide the blade off the wiper arm.
  3. Install new blades: Align the new blade with the arm, slide it into place, and ensure it clicks securely.
  4. Lower the wiper arms: Gently place the arms back on the windshield.
Replacing the Wiper Motor
  1. Disconnect the battery: Remove the negative terminal to prevent electrical shorts.
  2. Access the wiper motor: Remove the plastic cover under the wiper assembly by unscrewing any fasteners.
  3. Disconnect the wiper linkage: Use a wrench to detach the nuts holding the linkage to the motor.
  4. Remove the wiper motor: Unscrew the mounting bolts and disconnect the electrical connector.
  5. Install the new wiper motor: Reverse the removal steps to install the new motor.
  6. Reconnect the battery: Reattach the negative terminal and test the wipers.
Replacing the Wiper Relay
  1. Locate the faulty relay: Identify the relay using the owner's manual.
  2. Remove the relay: Pull the relay straight out from its socket.
  3. Install the new relay: Push the new relay firmly into the same socket.
  4. Test wiper functionality: Turn on the wipers to ensure they operate correctly.
Conclusion

Following these detailed steps will help you diagnose and fix the wiper issues on your 2021 Toyota Camry. If the problem persists after these repairs, further inspection by a professional technician may be necessary to rule out more complex electrical issues or control module faults.