FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the fuel pump failure in my 2022 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I fix the fuel pump failure in my 2022 Toyota Camry?

How do I fix the fuel pump failure in my 2022 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
779 words

Problem Statement

Learn how to diagnose and repair fuel pump failure in your 2022 Toyota Camry with step-by-step instructions and required tools.

Affected Component
fuel pump

Symptoms

  • •Engine Cranks but Does Not Start
  • •Intermittent Power Loss
  • •No Fuel Pressure
  • •Whining Noise
  • •Check Engine Light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Multimeter
  • •Basic hand tools (screwdrivers, sockets, wrenches)
  • •Safety goggles and gloves
  • •Floor jack and jack stands (if needed)

Additional Information

Affected Component
fuel pump
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Fuel Pump Failure in a 2022 Toyota Camry
Tools Required
  • OBD-II scanner
  • Fuel pressure gauge
  • Multimeter
  • Basic hand tools (screwdrivers, sockets, wrenches)
  • Safety goggles and gloves
  • Floor jack and jack stands (if needed)
Repair Instructions

Note: Always refer to the vehicle's service manual for specific torque specifications and procedures.

Step 1: Safety Precautions

  • Disconnect the negative battery terminal to prevent any electrical shorts.
  • Relieve fuel pressure by removing the fuel pump fuse and running the engine until it stalls.

Step 2: Access the Fuel Pump

  1. Remove the Back Seat:

    • Depending on the model, you may find access to the fuel pump under the rear seat cushion. Pull the seat cushion up or unbolt it if necessary.

  2. Remove the Fuel Pump Access Cover:

    • Locate and unbolt the access cover to the fuel pump. Be cautious of any sharp edges.

Step 3: Disconnect Fuel Lines and Electrical Connector

  1. Disconnect Fuel Lines:

    • Use a fuel line disconnect tool if necessary to detach the fuel lines from the pump. Be prepared for some residual fuel spillage.

  2. Disconnect Electrical Connector:

    • Unplug the electrical connector from the fuel pump. Make sure to press the release tab to avoid damaging the connector.

Step 4: Remove the Fuel Pump Module

  1. Unbolt the Fuel Pump Assembly:

    • Using a socket wrench, remove the bolts securing the fuel pump assembly to the tank.

  2. Lift Out the Assembly:

    • Carefully lift the fuel pump assembly out of the tank, making sure not to damage the fuel level sender.

Step 5: Install the New Fuel Pump

  1. Prepare the New Pump:

    • If necessary, transfer any components (fuel level sender, O-ring) from the old pump to the new one.

  2. Install the New Fuel Pump:

    • Position the new fuel pump into the tank and secure it using the bolts.

Step 6: Reconnect Fuel Lines and Electrical Connector

  1. Reconnect Electrical Connector:

    • Plug in the new fuel pump’s electrical connector.

  2. Reconnect Fuel Lines:

    • Reattach the fuel lines securely, ensuring no leaks.

Step 7: Reassemble and Test

  1. Replace Access Cover: Bolt down the access cover to the fuel pump.
  2. Reinstall the Back Seat: If removed, reattach the rear seat cushion.
  3. Reconnect Battery: Reattach the negative battery terminal.
  4. Check for Leaks: Turn the ignition key to the "ON" position to prime the system and check for leaks around the connections.
  5. Start the Engine: Start the vehicle to ensure proper operation. Check engine performance and listen for any unusual noises.
Conclusion

If the car starts and runs without issues, the repair was successful. If problems persist, further diagnostics may be required for other components such as the fuel injectors, or the engine control unit (ECU). Always ensure to follow safety guidelines when working with fuel systems to avoid fire hazards.