FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix an issue with the automatic door locks in my 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I fix an issue with the automatic door locks in my 2020 Toyota Camry?

How do I fix an issue with the automatic door locks in my 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
620 words

Problem Statement

Learn how to diagnose and repair issues with the automatic door locks in your 2020 Toyota Camry, including symptoms, diagnostic steps, and required tools.

Affected Component
central locking system
Estimated Time
2-3 hours

Symptoms

  • •Automatic Door Locks Not Engaging
  • •Manual Lock Function Works
  • •Key Fob Issues
  • •Dashboard Warning Lights

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Multimeter
  • •Trim removal tools
  • •New key fob battery

Additional Information

Affected Component
central locking system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Automatic Door Locks in a 2020 Toyota Camry

Tools Required
  • OBD-II scanner
  • Flathead screwdriver
  • Phillips screwdriver
  • Multimeter
  • Trim removal tools
  • New key fob battery (if needed)
Repair Instructions

Step 1: Check Key Fob Battery

  1. Remove the Key Fob: Use a flathead screwdriver to gently pry open the key fob.
  2. Replace the Battery: Note the orientation of the old battery and replace it with a new CR2032 battery.
  3. Reassemble the Key Fob: Snap the fob back together and test the lock function.

Step 2: Inspect the Door Lock Switch

  1. Access the Driver's Side Switch: Use a Phillips screwdriver to remove the panel covering the door switch.
  2. Disconnect the Switch: Carefully unplug the switch connector.
  3. Test the Switch: Use a multimeter to check for continuity when the switch is pressed. If the switch is faulty, replace it.

Step 3: Scan for Error Codes

  1. Connect the OBD-II Scanner: Plug the scanner into the OBD-II port located under the dashboard.
  2. Read Codes: Follow the scanner instructions to read any error codes.
  3. Address Any Codes: Investigate and repair any codes related to the central locking system.

Step 4: Visual Inspection

  1. Remove Door Panel: Use trim removal tools to carefully take off the door panel.
  2. Inspect Wiring: Check for any frayed wires or loose connections.
  3. Test Door Lock Actuator: Use a multimeter to check for power at the actuator when the lock switch is activated. If there is no voltage, further diagnose the wiring back to the BCM.

Step 5: Check BCM

  1. Locate BCM: The BCM is usually located under the dashboard or near the driver’s side.
  2. Inspect Connections: Ensure all connectors are secure and free of corrosion.
  3. Test the BCM: If necessary, consult the service manual for additional testing procedures. If the BCM is faulty, it may need to be replaced or reprogrammed.

Step 6: Reassemble and Test

  1. Reinstall Door Panel: Once repairs are made, carefully reattach the door panel, ensuring all clips are secured.
  2. Test Automatic Locks: Start the vehicle and test the automatic locking feature while driving and upon exiting the vehicle.
  3. Final Checks: Ensure all key fobs work and that the door locks function as intended.
Conclusion

If after performing these steps the automatic door locks still do not function, it may be necessary to seek assistance from a certified Toyota technician. They can perform more in-depth diagnostics and repairs that may involve specialized tools and software.