FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix a malfunctioning power window in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I fix a malfunctioning power window in a 2019 Toyota Camry?

How do I fix a malfunctioning power window in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
636 words

Problem Statement

Learn how to diagnose and fix a malfunctioning power window in your 2019 Toyota Camry with step-by-step instructions and required tools.

Affected Component
power window system
Estimated Time
2-3 hours

Symptoms

  • •Power window does not respond to the switch.
  • •Window raises or lowers intermittently.
  • •No noise when attempting to operate the window.
  • •Window works from one switch but not the other (driver's control vs. individual door switch).

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Torx screwdriver (if applicable)
  • •Wire connectors (if needed)
  • •Electrical tape
  • •Replacement window motor or switch (if needed)

Additional Information

Affected Component
power window system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing a Malfunctioning Power Window in a 2019 Toyota Camry

Symptoms:

  • Power window does not respond to the switch.
  • Window raises or lowers intermittently.
  • No noise when attempting to operate the window.
  • Window works from one switch but not the other (driver's control vs. individual door switch).
Tools Required
  • Multimeter
  • Flathead screwdriver
  • Phillips screwdriver
  • Torx screwdriver (if applicable)
  • Wire connectors (if needed)
  • Electrical tape
  • Replacement window motor or switch (if needed)
Repair Instructions
Step 1: Remove the Door Panel

  1. Disconnect the Battery:

    • Open the hood and disconnect the negative battery terminal to avoid any electrical shorts.

  2. Remove Door Handle and Trim:

    • Use a flathead screwdriver to carefully pry off any plastic covers over screws.
    • Remove screws securing the door handle and trim pieces.

  3. Remove the Door Panel:

    • Gently pull the door panel away from the door frame, starting from the bottom.
    • Disconnect any electrical connectors for window switches or door locks.
Step 2: Check the Window Switch
  1. Inspect or Replace the Window Switch:
    • If the switch shows no continuity, replace it with a new one.
    • Reinstall the door panel temporarily to test functionality before permanently securing it.
Step 3: Check the Wiring
  1. Inspect Wiring Harness:
    • Look for any broken wires or loose connections.
    • Repair any damaged wiring by soldering or using wire connectors and electrical tape.
Step 4: Test or Replace the Window Motor

  1. Remove the Window Motor:

    • Locate the motor, usually at the base of the door.
    • Remove screws or bolts securing the motor and disconnect the wiring harness.

  2. Test the Motor:

    • Connect the motor directly to a 12V battery to see if it operates.
    • If it does not work, replace the window motor.

  3. Install New Window Motor:

    • Position the new motor in place and secure it with screws or bolts.
    • Reconnect the wiring harness.
Step 5: Reassemble the Door Panel

  1. Reconnect Electrical Connectors:

    • Reattach all electrical connectors for switches and locks.

  2. Secure the Door Panel:

    • Align the door panel with the door frame and press it back into place.
    • Reinsert and tighten screws for the door handle and other trim pieces.
Step 6: Final Testing

  1. Reconnect the Battery:

    • Reconnect the negative battery terminal.

  2. Test the Window:

    • Test the window operation from both the driver's and individual door switches.
    • Ensure that the window operates smoothly without any obstruction.
Conclusion

If the power window is still not functioning after following these steps, further diagnostics may be needed to check for issues with the Body Control Module (BCM) or other electronic components related to the power window system.