FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I address the issue of my 2019 Toyota Camry's dashboard lights not working? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I address the issue of my 2019 Toyota Camry's dashboard lights not working?

How do I address the issue of my 2019 Toyota Camry's dashboard lights not working?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
652 words

Problem Statement

Learn how to diagnose and repair the dashboard lights issue in your 2019 Toyota Camry with step-by-step instructions.

Affected Component
dashboard lights
Estimated Time
2-4 hours

Symptoms

  • •Dashboard lights are completely off or intermittently functioning
  • •Other lights, such as the warning lights, may still work
  • •The dimmer switch for dashboard lights may not be responsive

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Screwdriver set

Additional Information

Affected Component
dashboard lights
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Certainly! Addressing the issue of dashboard lights not working in your 2019 Toyota Camry involves a systematic approach to diagnose and repair the problem. Below are detailed steps to follow:

Step 1: Visual Inspection

  • Tools Required: None
  • Instructions:
    1. Inspect the dashboard area for any visible signs of damage or loose connections.
    2. Check if the dimmer switch is turned up; it may be set too low.

Step 2: Check the Dimmer Switch

  • Tools Required: Multimeter (optional)
  • Instructions:
    1. Locate the dimmer switch on the dashboard.
    2. Turn the dimmer switch to its maximum setting and observe if the lights illuminate.
    3. If you have a multimeter, you can check the switch for continuity when toggled.

Step 3: Check the Fuses

  • Tools Required: Fuse puller or needle-nose pliers, multimeter
  • Instructions:
    1. Identify the fuse box in your Camry (usually located under the dashboard on the driver’s side or in the engine compartment).
    2. Refer to the owner’s manual to locate the fuse for the dashboard lights.
    3. Pull the fuse and inspect it visually for any signs of being blown (a broken wire or darkened appearance).
    4. Use a multimeter to check for continuity across the fuse. If it’s blown, replace it with a fuse of the same amperage.

Step 4: Inspect Wiring and Connectors

  • Tools Required: Screwdriver set, multimeter
  • Instructions:
    1. Remove the dashboard trim to access the wiring harness connected to the dashboard assembly (be careful not to damage clips).
    2. Inspect the wiring harness for any loose, frayed, or damaged wires.
    3. Use the multimeter to check for voltage at the connectors when the vehicle is turned on. If there’s no voltage, trace back to find any break in the circuit.

Step 5: Check the Instrument Cluster

  • Tools Required: Screwdriver set, multimeter
  • Instructions:
    1. If all previous steps do not resolve the issue, the problem may lie within the instrument cluster itself.
    2. Remove the instrument cluster by unscrewing the securing screws and disconnecting the wiring harness.
    3. Inspect the circuit board for any burnt components or solder joints.
    4. If necessary, consult a repair manual for your specific model for further disassembly and testing.
Repair Instructions

If Fuses or Wiring are Damaged

  1. Replace Blown Fuses: Simply replace any blown fuses with ones of the same amperage.
  2. Repair Wiring: If you find any damaged wiring, splice in new wire using solder and heat shrink tubing or use wire connectors to make a secure connection.

If Dimmer Switch is Faulty

  1. Replace the Dimmer Switch: If the switch is found to be non-functional, it can be replaced by disconnecting it from the wiring harness and installing a new switch.

If Instrument Cluster is Faulty

  1. Repair or Replace: If the instrument cluster is faulty, you can either repair it (if you have soldering skills) or replace it with a new or refurbished unit.
    • Disconnect the wiring harness.
    • Remove the old cluster and install the new one, reconnecting the wiring harness and securing with screws.
Final Steps
  1. Reassemble: Once all repairs are completed, reassemble the dashboard components.
  2. Test: Turn on the vehicle and check that the dashboard lights are functioning as expected.
  3. Clear Codes: If any diagnostic trouble codes (DTCs) were set, use an OBD-II scanner to clear them.
Conclusion

If the dashboard lights do not illuminate after performing these steps, it may be best to consult with a professional technician or take your vehicle to a Toyota dealership for further diagnosis. Some issues may require specialized tools or knowledge, especially with the vehicle's advanced electrical systems.