FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I troubleshoot the tire pressure monitoring system in my 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I troubleshoot the tire pressure monitoring system in my 2020 Toyota Camry?

How can I troubleshoot the tire pressure monitoring system in my 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
711 words

Problem Statement

Learn how to troubleshoot and resolve issues with the Tire Pressure Monitoring System (TPMS) in your 2020 Toyota Camry with detailed steps and required tools.

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours

Symptoms

  • •TPMS Warning Light is illuminated
  • •Inaccurate Pressure Readings
  • •Slow Leak Detection failure
  • •No Response to Air Pressure Changes

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •OBD-II Scanner
  • •TPMS sensor activation tool
  • •Tire inflator
  • •Basic hand tools (wrench set, screwdriver set)
  • •Torque wrench

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting the Tire Pressure Monitoring System (TPMS) in a 2020 Toyota Camry

The Tire Pressure Monitoring System (TPMS) is a crucial safety feature in your Toyota Camry, designed to alert you when tire pressures are too low. If you're experiencing issues with the TPMS, follow these detailed steps to diagnose and resolve the problem.

Step 1: Visual Inspection
  1. Check Tire Pressure: Use a reliable tire pressure gauge to check the pressure in all four tires. Ensure they are inflated to the manufacturer's specifications (found on the driver’s side door jamb).
  2. Inspect for Damage: Look for any visible damage to the tires, such as punctures, cuts, or sidewall bulges.
  3. Check Valve Stems: Ensure that the valve stems are not cracked or damaged, which can lead to air loss.
Step 2: Reset the TPMS
  1. Inflate Tires: If any tire is found to be under-inflated, inflate it to the correct pressure.
  2. TPMS Reset Procedure:
    • Turn the ignition to the "ON" position without starting the engine.
    • Locate the TPMS reset button, which is usually found beneath the dashboard or near the steering column.
    • Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
    • Start the engine and wait for a few minutes to see if the light turns off.
Step 3: Scan for Codes
  1. OBD-II Scanner: Use an OBD-II scanner compatible with Toyota vehicles to check for any TPMS-related diagnostic trouble codes (DTCs).
    • Connect the scanner to the OBD-II port (usually located under the dashboard near the driver’s seat).
    • Select the TPMS module and read any stored codes for further diagnosis.
Step 4: Check the TPMS Sensors
  1. Sensor Activation Tool: Obtain a TPMS sensor activation tool to check the functionality of the tire pressure sensors.
  2. Activate Sensors: Use the tool to activate each tire sensor. If the tool does not read a signal from any of the sensors, they may be faulty or need a battery replacement.
  3. Replace Sensors: If you diagnose a faulty sensor, you will need to replace it. Follow the steps under “Repair Instructions”.
Tools Required
  • Tire pressure gauge
  • OBD-II Scanner
  • TPMS sensor activation tool
  • Tire inflator
  • Basic hand tools (wrench set, screwdriver set)
  • Torque wrench (if removing tires)
Repair Instructions
Replacing a Faulty TPMS Sensor
  1. Lift the Vehicle: Use a hydraulic jack to lift the vehicle and secure it with jack stands.
  2. Remove the Tire:
    • Loosen the lug nuts using a tire iron.
    • Remove the lug nuts and take off the tire.
  3. Remove the TPMS Sensor:
    • Locate the TPMS sensor mounted on the inner rim.
    • If required, remove the tire from the wheel to access the sensor.
    • Unscrew the sensor from the rim and disconnect it from the valve stem.
  4. Install New Sensor:
    • Attach the new TPMS sensor to the valve stem and secure it in place.
    • Re-install the tire onto the wheel if it was removed.
  5. Reinstall the Tire:
    • Place the tire back onto the hub and hand-tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to the manufacturer’s specifications.
  6. Reinitialize TPMS: Follow the TPMS reset procedure outlined in Step 2.
Testing After Repair
  1. Check TPMS Light: Start the vehicle and verify that the TPMS warning light goes out after a few minutes of driving.
  2. Monitor Tire Pressure: Use a tire pressure gauge to regularly check the tire pressures and ensure they remain at the recommended levels.
Conclusion

By following these structured diagnostic steps and repair instructions, you should be able to effectively troubleshoot and resolve issues with the TPMS in your 2020 Toyota Camry. If problems persist, consider consulting a professional technician for further assistance.