How can I fix the windshield wipers not functioning in my 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

2-3 hours

Time

medium

Difficulty

medium

Severity

4 min read

614 words

Problem Statement

Learn how to diagnose and repair windshield wipers not functioning on your 2019 Toyota Camry with step-by-step instructions.

Affected Component

windshield wipers

Estimated Time

2-3 hours

Symptoms

•Windshield wipers do not operate at all when activated.
•Wipers may work intermittently or only on certain speeds.
•There may be a clicking sound when the wipers are activated.
•Wiper fluid may not spray if the wipers are not functioning.

Diagnostic Steps

1
Check the wiper blades for any physical damage or detachment.
2
Inspect the wiper arm for proper seating on the motor shaft.
3
Turn the vehicle on and toggle the wiper switch (low, high, and intermittent).
4
Observe if there is any response (motor noise, movement).
5
Locate the fuse box and inspect the wiper fuse for any signs of damage or burn.
6
Disconnect the wiper motor connector and check for voltage at the motor connector.
7
Locate the relay for the windshield wipers and swap it with another relay of the same type.
8
Check for any loose, corroded, or damaged wiring in the wiper circuit.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Fuse puller or needle-nose pliers
•Screwdriver set (flathead and Phillips)
•Replacement fuses (if necessary)
•Replacement wiper relay (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the wiper blades for any physical damage or detachment.
2
Inspect the wiper arm for proper seating on the motor shaft.
3
Turn the vehicle on and toggle the wiper switch (low, high, and intermittent).
4
Observe if there is any response (motor noise, movement).
5
Locate the fuse box and inspect the wiper fuse for any signs of damage or burn.
6
Disconnect the wiper motor connector and check for voltage at the motor connector.
7
Locate the relay for the windshield wipers and swap it with another relay of the same type.
8
Check for any loose, corroded, or damaged wiring in the wiper circuit.

Solution

Windshield Wipers Not Functioning - 2019 Toyota Camry (XV70)

Tools Required

Multimeter
Fuse puller or needle-nose pliers
Screwdriver set (flathead and Phillips)
Replacement fuses (if necessary)
Replacement wiper relay (if necessary)

Repair Instructions

Step 1: Replace the Fuse

If the wiper fuse is blown, remove it using a fuse puller.
Replace it with a new fuse of the same amperage (check the owner’s manual for specifications).
Reattach the fuse box cover and test the wipers again.

Step 2: Replace the Wiper Relay

Remove the relay from its socket in the fuse box.
Insert a new relay of the same type into the socket.
Test the windshield wipers to see if they now function.

Step 3: Replace the Wiper Motor (if necessary)

If the wiper motor is not receiving power, and the relay and switch are functional, the motor may need replacement.
Disconnect the vehicle's battery to avoid electrical shocks.
Remove the wiper arms by unscrewing the retaining nuts (using a socket wrench). Use caution to avoid damaging the arms.
Remove the cowl cover (if applicable) to access the wiper motor.
Disconnect the wiper motor connector.
Remove the mounting bolts for the wiper motor using the appropriate socket.
Install the new wiper motor by reversing the removal steps. Ensure all bolts are tight and the connector is secure.
Reattach the wiper arms and cowl cover.
Reconnect the battery and test the wipers.

Step 4: Re-test System

Once repairs are made, turn on the vehicle and test the windshield wipers through all settings (low, high, intermittent) to ensure proper operation.

Conclusion

By following these detailed steps, you should be able to diagnose and fix the windshield wipers on your 2019 Toyota Camry. If problems persist after these checks and repairs, it may be necessary to consult with a professional technician for further diagnosis.