FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the power windows not working in my 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I fix the power windows not working in my 2020 Toyota Camry?

How can I fix the power windows not working in my 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
662 words

Problem Statement

Follow this detailed guide to diagnose and fix power window issues in your 2020 Toyota Camry, including symptoms, diagnostic steps, and repair instructions.

Affected Component
power windows
Estimated Time
2-4 hours

Symptoms

  • •Power windows do not respond when the switch is pressed.
  • •Windows may not move at all or move intermittently.
  • •No sound from the window motor when the switch is activated.
  • •The driver’s side master switch may work for some windows but not for others.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Fuse puller or needle-nose pliers
  • •Screwdrivers (Phillips and flathead)
  • •Trim removal tool
  • •Replacement fuses
  • •Replacement window switch (if necessary)
  • •Replacement window motor (if necessary)

Additional Information

Affected Component
power windows
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Certainly! If the power windows are not working on your 2020 Toyota Camry, follow this detailed guide to diagnose and fix the issue.

Tools Required
  • Multimeter
  • Fuse puller or needle-nose pliers
  • Screwdrivers (Phillips and flathead)
  • Trim removal tool
  • Replacement fuses
  • Replacement window switch (if necessary)
  • Replacement window motor (if necessary)
Repair Instructions

Step 1: Replace Blown Fuse

  1. If you found a blown fuse, replace it with a new one of the same Amp rating.
  2. Re-test the window operation.

Step 2: Replace Faulty Window Switch

  1. Use a trim removal tool to carefully remove the switch panel from the door.
  2. Disconnect the electrical connector from the switch.
  3. Install the new switch by reversing the removal steps.
  4. Reconnect the battery and test the window operation.

Step 3: Replace Window Motor

  1. If the switch is functioning but the motor is not, you will need to replace the window motor:
    1. Remove the Door Panel:
      • Use a screwdriver to remove any screws securing the door panel.
      • Carefully pry the door panel away from the door frame using a trim removal tool.
      • Disconnect any electrical connectors for the speakers or switches.
    2. Remove the Window Motor:
      • Locate the window motor; it is typically mounted to the door frame.
      • Disconnect the electrical connector from the motor.
      • Remove the mounting screws or bolts securing the motor.
      • Carefully pull the motor out of the door.
    3. Install the New Motor:
      • Position the new window motor in place and secure it with screws.
      • Reconnect the electrical connector.
    4. Reassemble the Door Panel:
      • Reconnect any switches or speakers.
      • Align the door panel and press it back into place.
      • Secure with screws.
  2. Reconnect the battery and test the window operation.
Conclusion

If after following these steps the windows still do not operate correctly, further diagnosis may be needed, possibly requiring professional assistance. Be sure to document any repairs or replacements performed for future reference.