FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the fog lights not working in my 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I fix the fog lights not working in my 2020 Toyota Camry?

How can I fix the fog lights not working in my 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
664 words

Problem Statement

Learn how to diagnose and fix fog lights not working in your 2020 Toyota Camry with step-by-step instructions and required tools.

Affected Component
fog lights
Estimated Time
2-3 hours

Symptoms

  • •Fog lights do not illuminate when switched on.
  • •Dashboard indicator for fog lights may or may not illuminate.
  • •Other lights, such as headlights, are functioning normally.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead and Phillips screwdrivers
  • •Multimeter
  • •Fuse puller (optional)
  • •Replacement fog light bulbs (if necessary)
  • •Wiring harness repair kit (if wiring is damaged)
  • •Owner’s manual for reference

Additional Information

Affected Component
fog lights
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Fog Lights Not Working in a 2020 Toyota Camry
Tools Required
  • Flathead and Phillips screwdrivers
  • Multimeter
  • Fuse puller (optional)
  • Replacement fog light bulbs (if necessary)
  • Wiring harness repair kit (if wiring is damaged)
  • Owner’s manual for reference

Repair Instructions

Step 1: Visual Inspection
  • Begin by inspecting the fog light bulbs. If they are discolored or the filament is broken, they need to be replaced.
  • Clean the fog light lenses with a suitable automotive cleaner.
Step 2: Check the Fog Light Switch
  • Verify the operation of the fog light switch. If it does not click or feel right, consider replacing the switch.
Step 3: Inspect the Fuses

  1. Locate the Fuse Box:

    • Open the driver’s side door and pull back the cover on the left side of the dashboard.
    • Locate the engine compartment fuse box, typically near the battery.

  2. Remove the Fog Light Fuse:

    • Identify the fog light fuse using the diagram on the fuse box cover or the owner’s manual.
    • Use a fuse puller or pliers to carefully remove the fuse.

  3. Inspect the Fuse:

    • Check if the metal strip inside the fuse is broken. If so, replace it with a new fuse of the same amperage.
Step 4: Test the Fog Light Bulbs

  1. Remove the Fog Lights:

    • Access the fog light assembly. This may require removing the bumper cover depending on the design.
    • Locate the bulb socket and twist it counterclockwise to remove it.

  2. Replace the Bulbs:

    • Pull the old bulb out of the socket and insert the new bulb without touching the glass part with your fingers.
    • Reinstall the bulb socket by twisting it clockwise.
Step 5: Check the Wiring and Connectors

  1. Inspect Connections:

    • Check for loose, corroded, or damaged wiring and connectors leading to the fog lights.
    • If any wiring is damaged, repair it using a wiring harness repair kit, soldering, and heat shrink tubing.

  2. Use a Multimeter:

    • Set the multimeter to the continuity setting.
    • Probe the fog light connector and the corresponding wiring to ensure there is continuity.
Step 6: Reassemble and Test
  • Once all checks and repairs are completed, reassemble any components removed during the process.
  • Turn on the fog lights to verify they are functioning properly. If they still do not work, further investigation into the vehicle’s electrical system may be necessary.
Conclusion

If after following these steps the fog lights still do not work, it may be necessary to consult a professional technician for a deeper diagnostic, as the issue could be related to more complex electrical problems or the vehicle's body control module.