FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the engine knocking noise in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I fix the engine knocking noise in a 2019 Toyota Camry?

How can I fix the engine knocking noise in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
674 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix engine knocking noise in a 2019 Toyota Camry with step-by-step instructions and required tools.

Affected Component
engine
Estimated Time
2-4 hours

Symptoms

  • •A knocking or tapping noise emanating from the engine, particularly noticeable at idle or under load.
  • •Possible loss of power or rough idling.
  • •Check Engine Light may illuminate (depending on the severity).

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Mechanic’s stethoscope or long screwdriver
  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Oil filter wrench
  • •Oil catch pan
  • •Engine oil (0W-20)
  • •Replacement oil filter (if needed)
  • •Timing chain/belt tools (if inspecting)

Additional Information

Affected Component
engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
How to Fix Engine Knocking Noise in a 2019 Toyota Camry
Tools Required
  • Mechanic’s stethoscope or long screwdriver
  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Oil filter wrench
  • Oil catch pan
  • Engine oil (0W-20)
  • Replacement oil filter (if needed)
  • Timing chain/belt tools (if inspecting)

Repair Instructions

Step 1: Change the Engine Oil

  1. Prepare Your Workspace

    • Park the vehicle on a flat surface and engage the parking brake.
    • Place an oil catch pan under the engine.

  2. Drain Old Oil

    • Remove the oil drain plug using the appropriate socket. Allow the oil to drain completely.

  3. Replace Oil Filter

    • Use an oil filter wrench to remove the old oil filter. Ensure the rubber O-ring is removed with the filter.
    • Install the new oil filter, applying a small amount of oil to the O-ring for a proper seal.

  4. Add New Oil

    • Replace the drain plug and tighten it to the manufacturer’s specifications.
    • Pour in the new oil through the oil filler cap. Use the recommended oil type and quantity (usually around 5.5 quarts for the 2.5L engine).

  5. Check Oil Level

    • After filling, wait a few minutes, then check the oil level with the dipstick and top off if necessary.
Step 2: Addressing Other Potential Causes

  1. Inspect Engine Components

    • If the noise persists, inspect the engine mounts, timing chain/belt tensioner, and pulleys.
    • Tighten or replace any loose components as necessary.

  2. Check for Rod Knock

    • If you suspect a rod knock:
    • Remove the engine oil pan (this may require lifting the engine slightly).
    • Inspect the connecting rods and crankshaft for wear or damage.
    • If any components are worn, they will need to be replaced, which may require a complete engine rebuild.
Step 3: Clear Codes and Test Drive

  1. Clear DTCs

    • Use the OBD-II scanner to clear any codes that may have been logged during the diagnostic process.

  2. Test Drive the Vehicle

    • Take the car for a test drive to ensure that the knocking noise has been resolved.
    • Monitor engine performance and check for any reoccurrence of the noise.

Conclusion

If the knocking noise persists after these repairs, it may indicate a more serious internal engine issue. In such a case, consulting with a professional mechanic or considering an engine rebuild or replacement may be necessary. Always prioritize safety and ensure proper procedures are followed during repairs.