FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix a problem with the dashboard lights in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I fix a problem with the dashboard lights in a 2019 Toyota Camry?

How can I fix a problem with the dashboard lights in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
613 words

Problem Statement

Learn how to diagnose and repair dashboard lights issues in a 2019 Toyota Camry with step-by-step instructions.

Affected Component
dashboard lights
Estimated Time
2-3 hours

Symptoms

  • •Dashboard Lights Not Illuminating
  • •Partial Illumination
  • •Dim or Flickering Lights
  • •Error Messages

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Fuse Puller
  • •Screwdrivers (Phillips and flathead)
  • •Pliers
  • •Wiring Diagram for the 2019 Toyota Camry

Additional Information

Affected Component
dashboard lights
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Dashboard Lights Issue in a 2019 Toyota Camry
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Fuse Puller
  • Screwdrivers (Phillips and flathead)
  • Pliers
  • Wiring Diagram for the 2019 Toyota Camry

Repair Instructions

Step 1: Visual Inspection
  • Access the Dashboard: Remove any trim pieces around the dashboard using a flathead screwdriver or trim removal tool.
  • Check for Damage: Look for any visible signs of wear, frayed wires, or disconnected harnesses.
Step 2: Check Fuses
  • Locate Fuse Box: Refer to the owner’s manual for the exact location of the interior fuse box. Typically, it is located under the dashboard on the driver’s side.
  • Inspect Fuses: Use a fuse puller or pliers to remove the fuses associated with the dashboard lights (check the fuse diagram in the manual).
  • Replace Blown Fuses: If any fuses are blown, replace them with the same amperage rating.
Step 3: Battery Voltage Check
  • Test Battery: Using a multimeter, check the battery voltage. A fully charged battery should read around 12.6 volts. If it’s below 12 volts, consider charging or replacing the battery.
Step 4: Scan for Codes
  • Connect OBD-II Scanner: Plug in the OBD-II scanner into the diagnostic port under the dashboard.
  • Read Codes: Follow the scanner instructions to read any stored codes. Document any relevant codes for further investigation.
Step 5: Dimmer Switch Test
  • Locate Dimmer Switch: The dimmer switch is usually located on the dashboard, often near the headlight switch.
  • Test Functionality: Turn the dimmer switch to see if the dashboard lights respond. If they do not, this component may need replacement.
Step 6: Wiring Inspection
  • Inspect Connections: Check the wiring harness leading to the instrument cluster for loose, corroded, or damaged connections.
  • Repair or Replace Wires: If any damage is found, repair the wire using solder and heat shrink tubing or replace the entire harness if necessary.
Step 7: Replace Instrument Cluster (if necessary)
  • Remove Instrument Cluster:
    1. Disconnect the negative battery terminal to avoid electrical shock.
    2. Unscrew the instrument cluster mounting screws.
    3. Carefully pull the cluster out and disconnect the wiring harness.
  • Install New Cluster: Connect the new cluster, secure it with screws, and reattach the battery terminal.
  • Test Functionality: Start the vehicle and check if the dashboard lights are functioning properly.

Conclusion

By following these steps, you should be able to diagnose and fix the dashboard light issues in your 2019 Toyota Camry. If the problem persists after completing all the above checks and repairs, it may be advisable to consult a professional technician for further diagnosis, as there may be a deeper electrical issue at play.