FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I address a problem with the windshield washer fluid not spraying in my 2018 Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I address a problem with the windshield washer fluid not spraying in my 2018 Camry?

How can I address a problem with the windshield washer fluid not spraying in my 2018 Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
573 words

Problem Statement

Learn how to diagnose and repair the windshield washer fluid not spraying issue in your 2018 Toyota Camry with step-by-step instructions.

Affected Component
windshield washer system
Estimated Time
1-2 hours

Symptoms

  • •No spray from windshield washer nozzles when the washer button is pressed
  • •Fluid level is adequate in the washer reservoir
  • •No unusual sounds when activating the washer

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Small pin or needle
  • •Flathead screwdriver
  • •Basic hand tools (screwdrivers, pliers)

Additional Information

Affected Component
windshield washer system
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Problem: Windshield Washer Fluid Not Spraying in a 2018 Toyota Camry

Step 1: Verify Fluid Level
  1. Open the Hood:
    • Secure it with the prop rod.
  2. Locate the Washer Fluid Reservoir:
    • Typically found near the engine bay, marked with a windshield wiper symbol.
  3. Check Fluid Level:
    • Ensure the fluid is above the minimum mark.
Step 2: Check the Washer Pump Functionality
  1. Listen for Pump Operation:
    • Activate the washer while listening for the sound of the pump running.
    • If you hear no sound:
      • The pump may be faulty or not receiving power.
    • If you hear the pump but no fluid is spraying, proceed to the next step.
Step 3: Inspect the Washer Nozzles
  1. Examine Nozzles for Blockages:
    • Use a small pin or needle to clear any debris from the nozzles.
    • If you notice any blockage, clean it thoroughly.
Step 4: Check the Washer Pump Electrical Connections
  1. Locate the Washer Pump:
    • It is usually located at the bottom of the washer fluid reservoir.
  2. Disconnect the Electrical Connector:
    • Use a flathead screwdriver if necessary to gently pry off the connector.
  3. Check for Corrosion:
    • Inspect the connector and terminals for corrosion or damage.
Step 5: Test the Washer Pump
  1. Use a Multimeter:
    • Set it to the DC voltage setting.
  2. Reconnect the Pump:
    • Securely connect the pump back to the wiring harness.
  3. Activate the Washer:
    • While a helper activates the washer, measure the voltage at the pump connector.
    • You should see around 12V. If not, there may be an issue with the circuit or switch.
Tools Required
  • Multimeter
  • Small pin or needle
  • Flathead screwdriver
  • Basic hand tools (screwdrivers, pliers)
Repair Instructions
If the Pump is Not Working
  1. Replace the Washer Pump:
    • Disconnect the pump from the reservoir.
    • Remove any mounting screws and pull the pump out gently.
    • Install the new pump by reversing the removal steps.
    • Reconnect the electrical connector.
If the Electrical Circuit is Faulty
  1. Inspect Wiring:
    • Check for damaged wires leading to the washer pump.
    • Repair any damaged wires or replace the harness if necessary.
  2. Replace the Switch:
    • If the circuit is intact but you’re not getting voltage, consider replacing the washer switch on the steering column.
If the Nozzles are Clogged
  1. Clear Blockages:
    • Use the pin or needle to ensure all nozzles are clear.
    • Run the washer to test functionality.
Final Steps
  1. Reconnect Everything:
    • Ensure all connections are secure.
  2. Fill Washer Fluid Reservoir:
    • If you drained it for inspection, refill with the appropriate washer fluid.
  3. Test the System:
    • Activate the washer to confirm that fluid sprays from the nozzles.
Conclusion

Following these steps should help you diagnose and repair the windshield washer fluid issue in your 2018 Toyota Camry. If problems persist after these checks, it may be advisable to consult a professional technician for further diagnostics and repairs.