why does my Toyota Camry shake when I come to a stop

Toyota Camry Seventh Generation (2012-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

456 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking in Toyota Camry when stopping. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported when working under it.

Symptoms

•Shaking or vibrating felt in the steering wheel or chassis
•Pulsating brake pedal during braking
•Uneven tire wear
•Noises such as grinding or squeaking from the brakes
•Vehicle pulls to one side when braking

Diagnostic Steps

1
Inspect brake pads and rotors for wear and damage.
2
Check wheel alignment and tire balance.
3
Examine suspension components for wear or damage (e.g., struts, shocks, control arms).
4
Scan for any error codes using an OBD-II scanner.
5
Perform a road test to observe behavior at various speeds and conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Brake cleaner
•Jack and jack stands
•Tire balancer

Parts Required

•Brake pads
•Brake rotors
•Suspension components (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads and rotors for wear and damage.
2
Check wheel alignment and tire balance.
3
Examine suspension components for wear or damage (e.g., struts, shocks, control arms).
4
Scan for any error codes using an OBD-II scanner.
5
Perform a road test to observe behavior at various speeds and conditions.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the negative battery terminal to ensure safety.

2. Inspect and Replace Brake Components

Tools Required: Socket set, torque wrench, brake cleaner
Remove the wheel to access the brake assembly.
Inspect the brake pads for thickness; replace if less than 3mm.
- Sub-step: Remove caliper bolts, slide caliper off, and replace pads.
- Sub-step: Check rotors for warping; replace if necessary.
Reinstall the caliper and wheel, torque bolts to manufacturer specifications.

3. Check and Adjust Alignment and Tire Balance

Tools Required: Alignment machine (optional), tire balancer
Visually inspect tires for uneven wear.
If uneven wear is present, balance tires and check alignment.
- Sub-step: Adjust alignment as per manufacturer specifications.

4. Inspect Suspension Components

Tools Required: Jack and jack stands, wrench set
Lift the vehicle and inspect the suspension components for play or damage.
Replace worn out struts, shocks, or control arms as necessary.
- Sub-step: Remove the damaged component and install the new part, ensuring proper torque specifications are followed.