my Toyota Camry shakes when I accelerate what's causing it

Toyota Camry Seventh Generation (2012-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

484 words

Problem Statement

Learn how to diagnose and fix shaking issues when accelerating in your Toyota Camry. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the vehicle to cool before inspecting the engine components.

Symptoms

•Shaking or vibration felt through the steering wheel or floor
•Increased noise during acceleration
•Vehicle pulls to one side while accelerating
•Possible loss of power or hesitation
•Uneven tire wear

Diagnostic Steps

1
Inspect tires for damage or uneven wear patterns.
2
Check tire pressure to ensure proper inflation.
3
Perform a visual inspection of the driveshaft and CV joints for any signs of wear or damage.
4
Use an OBD-II scanner to check for any stored trouble codes.
5
Inspect engine mounts for signs of wear or damage.
6
Test drive the vehicle to replicate the shaking and note specific conditions (speed, load).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench
•OBD-II scanner

Parts Required

•Tires (if worn or damaged)
•Engine mounts (if damaged)
•CV joints (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for damage or uneven wear patterns.
2
Check tire pressure to ensure proper inflation.
3
Perform a visual inspection of the driveshaft and CV joints for any signs of wear or damage.
4
Use an OBD-II scanner to check for any stored trouble codes.
5
Inspect engine mounts for signs of wear or damage.
6
Test drive the vehicle to replicate the shaking and note specific conditions (speed, load).

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to ensure safety during repairs.

2. Inspect and Replace Tires

Tools Required: Tire pressure gauge, jack, jack stands, lug wrench.
Check tire pressure and inflate to manufacturer specifications.
Inspect the tires for uneven wear or damage; replace if necessary.
Rotate tires if uneven wear is observed to ensure even distribution.

3. Check and Replace Engine Mounts

Tools Required: Socket set, torque wrench.
Visually inspect engine mounts for cracks or signs of deterioration.
Remove the bolts securing the engine mounts using a socket set.
Replace the damaged engine mounts with new ones and torque the bolts to the specified manufacturer values.

4. Inspect Driveshaft and CV Joints

Tools Required: Socket set, jack, jack stands.
Raise the vehicle and secure it on jack stands.
Inspect the driveshaft for any visible bends or cracks.
Check CV joints for torn boots or play; replace if necessary.

5. Test Drive

Reconnect the battery.
Test drive the vehicle to ensure the shaking is resolved.