how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

319 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry. Step-by-step guide to ensure your maintenance light is off after service.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmissions) before performing the reset procedure.

1
Ensure the vehicle is parked on a level surface with the ignition turned off.
2
Insert the key into the ignition or press the start button without pressing the brake pedal (for push-button start).
3
Locate the trip meter reset button on the dashboard.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Turn on the Ignition

Sub-steps:
- Insert the key into the ignition or press the ignition button without pressing the brake.
- Turn the key to the "On" position or press the start button once to power on the electronics without starting the engine.

2. Reset Trip Meter

Sub-steps:
- Press and hold the trip meter reset button (located on the instrument cluster).
- While holding the button, turn the ignition off and then back to the "On" position without starting the engine.
- Continue holding the trip meter reset button until the display shows "000000" or the maintenance light goes off.

3. Turn Off Ignition

Sub-steps:
- Release the trip meter reset button.
- Turn the ignition off completely.