FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
397 words

Problem Statement

Learn how to reset the maintenance light on a 2012-2017 Toyota Camry. Step-by-step guide with diagnostic steps and verification instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a secure, stationary position while performing this procedure.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •Reminder message appears when starting the vehicle
  • •Service indicator does not turn off after routine maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this procedure.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
2. Resetting the Maintenance Light
  1. Locate the Odometer Reset Button: Find the button on the instrument panel, usually located near the speedometer.
  2. Press and Hold the Button: Press and hold the odometer reset button firmly.
  3. Turn ON the Ignition: While still holding the button, turn the ignition key to the ON position (do not start the engine).
  4. Wait for Light to Reset: Keep holding the button until the maintenance light flashes and turns off, which typically takes about 10 seconds.
  5. Turn OFF the Ignition: Release the button and turn the ignition key back to the OFF position.
  6. Start the Engine: Start the engine to ensure the maintenance light is no longer illuminated.