how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Less than 15 minutes

Time

easy

Difficulty

low

Severity

2 min read

313 words

Problem Statement

Learn how to reset the maintenance light on a 2012-2017 Toyota Camry. Step-by-step guide for a quick and easy reset process.

Affected Component

Electrical

Estimated Time

Less than 15 minutes

Important safety information - read before proceeding

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition without starting the engine.
3
Press and hold the odometer reset button on the instrument panel.
4
Turn the ignition switch to the 'ON' position while still holding the odometer reset button.
5
Continue to hold the button until the maintenance light resets, which typically takes about 10 seconds.
6
Release the odometer reset button once the maintenance light goes off.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition without starting the engine.
3
Press and hold the odometer reset button on the instrument panel.
4
Turn the ignition switch to the 'ON' position while still holding the odometer reset button.
5
Continue to hold the button until the maintenance light resets, which typically takes about 10 seconds.
6
Release the odometer reset button once the maintenance light goes off.

Solution

1. Preparation

2. Reset the Maintenance Light

Insert the key into the ignition without starting the engine.
Press and hold the odometer reset button on the instrument panel.
Turn the ignition switch to the "ON" position while continuing to hold the odometer reset button.
Wait for the maintenance light to turn off (approximately 10 seconds).
Release the odometer reset button after the light turns off.