FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
409 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2012-2017) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Possible reminders for scheduled maintenance displayed
  • •Normal vehicle operation aside from the indicator

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ignition key

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is in a safe, well-ventilated area.
  • Gather required tools and ensure the ignition key is accessible.
2. Resetting the Maintenance Light

  1. Turn Off Ignition

    • Turn the ignition key to the "OFF" position.

  2. Press and Hold ODO/TRIP Button

    • Locate and press the "ODO/TRIP" button on the instrument panel.
    • Keep the button pressed throughout the next steps.

  3. Turn Ignition to ON

    • Turn the ignition key to the "ON" position without starting the engine.
    • Ensure all dashboard lights illuminate.

  4. Hold ODO/TRIP Button

    • Continue holding the "ODO/TRIP" button for approximately 10 seconds.
    • Observe the maintenance light; it should turn off after a few moments.

  5. Release Button

    • Release the "ODO/TRIP" button once the light has reset.

  6. Verify Reset

    • Turn the ignition key to the "OFF" position again.
    • Turn it back to "ON" to confirm the maintenance light is no longer illuminated.