how to fix the rearview camera not working in Toyota Camry Seventh Generation (2012-2017)

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the vehicle's battery to ensure safety while working on electrical components.

2. Inspect and Replace Fuses

• Locate the Fuse Box: Check the owner's manual for the specific location of the fuse box.
• Remove the Fuse: Use a fuse puller or needle-nose pliers to extract the relevant fuses for the backup camera.
• Check for Blown Fuses: Inspect the fuses visually or use a multimeter.
• Replace if Necessary: If blown, replace with an identical fuse rated for the same amperage.

3. Inspect Camera and Wiring

• Remove the Camera: Access the rear camera by removing the trim panel in the trunk or tailgate.
• Check Connections: Ensure the camera connector is securely attached and free from corrosion.
• Inspect Wiring: Look for wear, cuts, or disconnections in the wiring harness. Repair or replace any damaged sections.

4. Test the Camera

• Reconnect Battery: Reconnect the battery to restore power.
• Shift into Reverse: Check if the camera displays a feed on the infotainment screen.
• Bypass Test: If still not functioning, connect the camera directly to a power source to verify it operates independently.

5. Replace Camera (if necessary)

• Remove the Faulty Camera: If the camera is defective, remove it from the vehicle.
• Install New Camera: Install a new rearview camera, ensuring it is properly secured and connections are tight.
• Reassemble Trim Panels: Once installed, replace any trim panels removed during the process.