how to fix the passenger side window not working in Toyota Camry Seventh Generation (2012-2017)

Solution

1. Preparation

• Gather tools and materials.
• Disconnect the negative battery terminal to prevent electrical shorts.

Tools Required:

• Screwdriver set
• Multimeter
• Wire connectors (if needed)

2. Remove Door Panel

• Remove any screws securing the door panel (typically located behind the door handle and along the bottom).
• Use a flathead screwdriver to gently pry off the door panel clips.
• Carefully lift the door panel away from the door and disconnect any electrical connectors.

3. Inspect and Test Window Motor

• Locate the window motor inside the door.
• Disconnect the motor's electrical connector.
• Using a multimeter, test for power at the connector when the switch is activated.
• If power is present, the motor may need replacement; if no power, proceed to check the switch and wiring.

4. Repair or Replace Components

• If the motor is faulty, remove the screws holding it in place and pull it out.
• Install the new motor in reverse order, ensuring it is aligned correctly.
• If the switch is defective, replace it by disconnecting the old switch and connecting the new one.

5. Reassemble Door Panel

• Reconnect any electrical connectors to the door panel and ensure all clips are aligned.
• Secure the door panel with screws previously removed.
• Reconnect the negative battery terminal.