why does my Tesla Model Y Current (2020-present) shake when I brake

Tesla Model Y Current (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

497 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibrations in Tesla Model Y (2020-present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the 12V battery before working on the braking system.
•Allow the brakes to cool down before inspection or replacement.

Symptoms

•Vibration felt through the steering wheel during braking
•Pulsating brake pedal
•Noise coming from the braking system
•Decreased braking performance
•Uneven tire wear

Diagnostic Steps

1
Inspect brake rotor condition for warping or uneven wear.
2
Check brake pad thickness and condition.
3
Examine suspension components for wear or damage.
4
Inspect tire condition and balance.
5
Perform a visual inspection of the brake calipers for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack
•Jack stands
•Torque wrench
•Runout gauge
•Brake grease

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a flat, stable surface and engage the parking brake.
Wear safety gloves and goggles.

2. Remove Wheel

Tools Required: Lug wrench, jack, jack stands.
Loosen the lug nuts slightly while the vehicle is on the ground.
Use the jack to lift the vehicle and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Rotors (if necessary)

Check the rotors for warping with a runout gauge.
If warped, remove the brake caliper by loosening the caliper bolts.
Hang the caliper securely (do not let it hang by the brake line).
Remove the rotor by unscrewing any retaining screws and sliding it off the hub.
Install the new rotor, ensuring it is seated properly. Reattach any retaining screws.

4. Inspect and Replace Brake Pads (if necessary)

Remove the old brake pads from the caliper bracket.
Inspect the condition of the brake pads; replace if they are worn.
Apply brake grease to the back of the new pads to minimize noise.
Install the new brake pads into the caliper bracket.

5. Reassemble and Test

Reattach the brake caliper over the new pads and torque the caliper bolts to manufacturer specifications.
Reinstall the wheel and torque the lug nuts in a crisscross pattern.
Lower the vehicle and perform a test drive to ensure the issue is resolved.